查看ESP8266的源代码
←
ESP8266
跳转到:
导航
,
搜索
因为以下原因,你没有权限编辑本页:
您刚才请求的操作只有这个用户组中的用户才能使用:
用户
您可以查看并复制此页面的源代码:
[[文件:Esp8266ex-chip.jpg]] == 概述 == ESP8266 是一个带完整 WiFi 功能、 同时带一个 32bit MCU 的 SoC,可以取代原 Arduino 核心板 + WiFi 扩展板完成的大部分应用 最重要的,他的价格,只有 RMB 10 块左右 带 1MB Flash 的模块价格,也只在 RMB 13 块左右,批量的价格更便宜 === 总体结构 === ESP8266EX 集成:天线开关,RF balun,功率放大器,低噪放大器,过滤器,电源管理模块,32 位 MCU 仅需 7 个外围器件,就是一个完整的带 32bit MCU、完整 WiFi 功能的 SoC ESP8266 结构框图: [[文件:Esp8266ex-block.jpg]] 内部 CPU (MCU) 使用 Tensilica’s L106 钻石系列32位内核处理器,带片上 SRAM <br><br> === MCU 结构 === ;; Tensilica Xtensa LX3 32-bit RISC SOC clocked at 80 MHz,It can also reach a maximum value of 160MHz ;; Only 20% of MIPS has been occupied by the WiFi stack, the rest can all be used for user application programming and development MCU Core 的框图: [[文件:Tensilica-xtensalx3.jpg]] * 32-bit ALU * 16, 32 or 64 GPR * six special purpose registers * 80 base instructions The Xtensa ISA employs 24-bit instructions with 16-bit narrow encodings for the most common instructions <br><br> === SoC 内部存储 === ESP8266EX WiFi SoC is embedded with memory controller, including SRAM and ROM. MCU can visit the memory units through iBus, dBus, and AHB interfaces. According to our current version of SDK provided, SRAM space that is available to users is assigned as below: * RAM size is around 50 KB, that is to say, when ESP8266EX is working under the station mode (WiFi) and is connected to the router, programmable space accessible to user in heap and data section is around 50 KB) * There is no programmable ROM in the SoC, therefore, user program must be stored in an external SPI flash. <br><br> == Quick Start == <br><br> == 资源 == <br><br> <br><br> <br><br> <br><br> <br><br> <br><br> <br><br> <br><br> <br><br> <br><br>
返回到
ESP8266
。
个人工具
3.147.45.90
该IP地址的讨论
登录
名字空间
页面
讨论
变换
查看
阅读
查看源代码
查看历史
操作
搜索
导航
首页
社区专页
新闻动态
最近更改
随机页面
帮助
工具箱
链入页面
相关更改
特殊页面