查看Noduino OpenPlug的源代码
←
Noduino OpenPlug
跳转到:
导航
,
搜索
因为以下原因,你没有权限编辑本页:
您刚才请求的操作只有这个用户组中的用户才能使用:
用户
您可以查看并复制此页面的源代码:
== Overview == * AC 85V - 250V Smart Plug * ESP8285 inside * 250V 10A relay * Shell size 53mm x 53mm x 27mm [[文件:Open-plug-board-shell.jpg | 600px]] [[文件:Open-plug-board.jpg | 600px]] [[文件:Noduino-works-with-logo.png | 600px]] <br><br> == Quick Start == [[文件:Maike-wifi-ctrl-2233-all-en.jpg]] * Power on the plug, waiting 8s * Light is flashing slowly means waiting for network matching * If there is no flash, please press the button for 10sec. * Mobile connect to 2.4G WiFi, scan the QR code in WeChat and click "Network Connection" * Enter WiFi password and click "Connect" then waiting for network connection. (P.S. only 2.4G WiFi is applicable, 5G WiFi and Enterprise - level security certifications are not supportable.) * Finish WiFi configuration, WeChat will be in LAN devices discovery mode with devices list visible. * Click the first device then press "Like Device" button to bind the device. (P.S. if the device has been binding, then the button at bottom is "Enter Official Account") * Finish above steps, please press "Enter Official Account" button then click "Devices" button to find your binding devices list. Click the device to enter control page. If more people need to control the device, please connect to the same router and scan the same QR code while the device is power on. Click "Device connected and skip" -> "Link Device"->"Enter Official Account" to control smart devices ;;Note: * Press the button momentarily, manual switch controller * Press the button for 10sec, restore the factory settings. <br><br> == Open API == Afer you guys 'Link Device' in WeChat, Enter Official Account: * click "Devices" to list your binding devices * select your OpenPlug in the list, enter control page, click upright corner, then Copy URL * paste the URL into web browser (Chrome or Safari) to access the control page in browser * check the source code of the page to get the following variables: <source lang=php> var devid = YOUR_DEVICE_ID; var mqtt_uname = xxxxxxxx; var mqtt_pass = TTTTTTTTTTTTTTTT; < ---- 3600s life time var mqtt_server = xxx.xxx.xxx.xxx; var mqtt_port = xxx; </source> <br><br> === Go === ==== Prepare ==== Prepare the Go lang: <source lang=bash> $ sudo apt-get install golang-go $ sudo apt-get install golang-eclipse-paho-dev $ export GOPATH=/usr/share/gocode </source> Refer to: * https://golang.org * http://www.eclipse.org/paho/clients/golang/ <br> ==== Turn On/Off ==== <source lang=cpp> package main import ( "fmt" "os" "strconv" "strings" "net/http" "encoding/json" MQTT "git.eclipse.org/gitroot/paho/org.eclipse.paho.mqtt.golang.git" ) //define a function for the default message handler var f MQTT.MessageHandler = func(client *MQTT.Client, msg MQTT.Message) { fmt.Printf("TOPIC: %s\n", msg.Topic()) fmt.Printf("MSG: %s\n", msg.Payload()) } var uid string = "YOUR_mqtt_uname" func main() { if len(os.Args[1:]) >= 2 { devid := os.Args[1] cmd := os.Args[2] msg := "" if cmd == "on" { msg = "on" } else if cmd == "off" { msg = "off" } else if cmd == "ota" { msg = "ota" } pass := get_token(uid) send_msg(devid, msg, pass) } else { help_msg() } } func help_msg() { fmt.Println("Supported cmd:") fmt.Println("\topenlight dev_id on") fmt.Println("\topenplug dev_id off") fmt.Println("\topenplug dev_id ota") } func send_msg(devid string, msg string, pass string) { opts := MQTT.NewClientOptions().AddBroker("tcp://mqtt.noduino.org:1883") opts.SetClientID("cid_" + devid) opts.SetUsername(devid) opts.SetPassword(pass) opts.SetDefaultPublishHandler(f) c := MQTT.NewClient(opts) if token := c.Connect(); token.Wait() && token.Error() != nil { panic(token.Error()) } mqtt_tx_topic := "app2dev/" + devid token := c.Publish(mqtt_tx_topic, 0, false, msg) token.Wait() } func get_token(user_id string) (string) { url := "http://api.noduino.org/user/token" type Body struct { UID string `json:"user_id"` } var body = Body { UID: user_id, } data, err := json.Marshal(body) //fmt.Println(string(data)) if err == nil { resp, err := http.Post(url, "application/json", strings.NewReader(string(data))) if err != nil { fmt.Println(err) } defer resp.Body.Close() dec := json.NewDecoder(resp.Body) var v map[string]interface{} if err := dec.Decode(&v); err != nil { fmt.Printf("error: %v\n", err) } else { if val, ok := v["user_token"].(string); ok { return val } } } return "" } </source> <source lang=bash> $ go build openplug.go $ ./openplug MKD12343405300 on $ ./openplug MKD12343405300 off </source> <br><br> === node.js === ==== Prepare ==== Download the node-v6.9.1-xxx.tgz from http://nodejs.org <source lang=bash> $ tar xf node-v6.9.1-*.tar.xz $ sudo cp -a node-v6.9.1*/* /usr/local/ $ sudo npm install -g MQTTClient $ sudo npm install -g request </source> <br><br> ==== Turn off ==== Turn off the plug throught node.js: * replace the mqtt_uname in line 6 * replace the devid in line 7 <source lang=javascript> $ cat switch.js #! /usr/bin/env node // replace it to yours //////////////////////////////////////////////// var mqtt_uname = "o7okr76757879RfhBs_XM339"; <---- YOUR_mqtt_uname var devid = "MJD123456789012"; <---- YOUR_devid //////////////////////////////////////////////// var opt = { username: mqtt_uname, password: "" }; var mqtt_tx_topic = 'app2dev/' + devid var args = process.argv.slice(2); var set_state = args[0]; if (set_state != 'on' && set_state != 'off') { console.log("Supported cmd:"); console.log("\tswitch.js on"); console.log("\tswitch.js off"); process.exit(1); } console.log("st = " + set_state); var http_req = require('/usr/local/lib/node_modules/request'); http_req.post( 'http://api.noduino.org/user/token', { json: {user_id: opt.username} }, function (error, response, body) { if (!error && response.statusCode == 200) { console.log(body); opt.password = body.user_token; //console.log(opt) var MQTTClient = require('/usr/local/lib/node_modules/MQTTClient').Client; var client = new MQTTClient('mqtt.noduino.org', 1883, opt); client.connect(function () { console.log("connect ok!"); var pubopt = { qos_level: 2 } client.publish(mqtt_tx_topic, set_state, pubopt, function (message_id) { console.log("public ok! message_id = " + message_id); process.exit(0); }); }); } else { console.log("Request the user token failed"); process.exit(1); } } ); $ ./switch.js off </source> <br><br> ==== Turn On ==== Turn on the plug: <source lang=bash> $ ./switch.js on </source> <br><br> ==== Debug ==== <font color=red><b>If you get the following error:</b></font> <source lang=bash> /usr/local/lib/node_modules/MQTTClient/client.js:56 throw Error('user names are kept to 12 characters or fewer'); ^ Error: user names are kept to 12 characters or fewer </source> Please patch the /usr/local/lib/node_modules/MQTTClient/client.js to remove the line of checking the length of username and password: <source lang=bash> --- a/client.js +++ b/client.js @@ -52,10 +52,10 @@ var Client = exports.Client = function (host, port, options) { options.alive_timer = 30; options.ping_timer = parseInt(options.alive_timer * 0.6 * 1000); // 用户名和密码 - if (typeof options.username == 'string' && options.username.length > 12) - throw Error('user names are kept to 12 characters or fewer'); - if (typeof options.password == 'string' && options.password.length > 12) - throw Error('passwords are kept to 12 characters or fewer'); + //if (typeof options.username == 'string' && options.username.length > 12) + // throw Error('user names are kept to 12 characters or fewer'); + //if (typeof options.password == 'string' && options.password.length > 12) + // throw Error('passwords are kept to 12 characters or fewer'); // Will flag if (options.will_flag && (typeof options.will_topic != 'string' || typeof options.will_message != 'string')) throw Error('missing will_topic or will_message when will_flag is set'); </source> <br><br> === python === ==== Prepare ==== <source lang=bash> $ python3 --version Python 3.5.3rc1 $ pip3 install paho-mqtt Collecting paho-mqtt Downloading paho-mqtt-1.2.tar.gz (49kB) 100% |████████████████████████████████| 51kB 308kB/s Building wheels for collected packages: paho-mqtt Running setup.py bdist_wheel for paho-mqtt ... done Stored in directory: /home/comcat/.cache/pip/wheels/fa/db/fb/b495e37057e2f40534726b3c00ab26a58fc80fb8d17223df07 Successfully built paho-mqtt Installing collected packages: paho-mqtt Successfully installed paho-mqtt-1.2 </source> More infor: https://pypi.python.org/pypi/paho-mqtt <br> ==== Turn off ==== * replace the mqtt_uname in line 10 * replace the devid in line 11 <source lang=python> $ cat switch.py #!/usr/bin/python3 import json, requests import paho.mqtt.client as mqtt import sys # replace it to your id ########################################### mqtt_uname = 'o7okr76757879RfhBs_XM339' <---- YOUR_mqtt_uname devid = 'MJD123456789012' <---- YOUR_devid ########################################### def help_msg(): print("Supported cmd:") print("\tswitch.py on") print("\tswitch.py off") if len(sys.argv) >= 2: set_state = sys.argv[1] else: help_msg() sys.exit(-2) if set_state != 'on' and set_state != 'off': help_msg() sys.exit(-2) url = 'http://api.noduino.org/user/token' dat = dict ( user_id = mqtt_uname, ) try: resp = requests.post(url = url, json = dat) except Exception as e: print(e) sys.exit(-1) p = resp.json() mqtt_pass = p['user_token'] mqtt_rx_topic = 'dev2app/' + devid mqtt_tx_topic = 'app2dev/' + devid mqtt_host = 'mqtt.noduino.org' mqtt_port = 1883 mqtt_msg = set_state def on_connect(client, u_dat, rc): if rc == 0: print("Connected successfully") else: print("Connection failed. rc = "+str(rc)) def on_publish(client, u_dat, rc): print("Message "+str(rc)+" published.") def on_subscribe(client, u_dat, mid, qos): print("Subscribe with "+str(mid)+" received") def on_message(client, udat, msg): print("Message received on topic "+msg.topic+" and payload "+str(msg.payload)) mqttc = mqtt.Client() mqttc.on_connect = on_connect mqttc.on_publish = on_publish mqttc.on_subscribe = on_subscribe mqttc.on_message = on_message mqttc.username_pw_set(mqtt_uname, mqtt_pass) mqttc.connect(mqtt_host, mqtt_port) mqttc.publish(mqtt_tx_topic, mqtt_msg) #mqttc.subscribe(mqtt_rx_topic) #mqttc.loop_forever() </source> <source lang=bash> $ ./switch.py off </source> <br> ==== Turn On ==== Turn on the plug: <source lang=bash> $ ./switch.py on </source> <br><br> === HTML5 === The device control page in WeChat is a H5 page. Using a MQTT client implement in javascript , using the mqttws31.js library: <source lang=javascript> var client_id = parseInt(Math.random() * 10000, 10) + '_' + mqtt_uname; var client = new Paho.MQTT.Client(mqtt_server, mqtt_port, "/mqtt", client_id); var state = 0; function failConnect(e) { console.log("connect failed"); console.log(e); console.log("reconnecting ..."); client.connect({userName: mqtt_uname, password: mqtt_pass, onSuccess:onConnect, onFailure: failConnect, mqttVersion:3}); } function onConnect() { console.log("onConnect OK!"); subscribe('dev2app/' + devid); } function subscribe(topic) { client.subscribe(topic); } function onMessageArrived (message) { // MQTT message from device example: {"m":"status","d":"on","t":"2015-12-30T00:00:00+08:00"} console.log("Arrived Message: [", message.payloadString, "]"); try { job = JSON.parse(message.payloadString); state = job.d; } catch(e) { console.log("JSON object error!"); alert("JSON error, RX data is: " + message.payloadString); return; } if(state == 'on') { $('#switch').removeClass('btn_off'); $('#switch').addClass('btn_on'); } else if (state == 'off') { $('#switch').removeClass('btn_on'); $('#switch').addClass('btn_off'); } } function onDisConnect() { console.log("reconnecting ..."); client.connect({userName: mqtt_uname, password: mqtt_pass, onSuccess:onConnect, onFailure: failConnect, mqttVersion:3}); } function publish(topic, msg){ message = new Paho.MQTT.Message(msg); message.destinationName = topic; client.send(message); console.log("publish message ok!"); } function init() { client.connect({userName: mqtt_uname, password: mqtt_pass, onSuccess:onConnect, onFailure: failConnect, mqttVersion:3}); client.onMessageArrived = onMessageArrived; client.onConnectionLost = onDisConnect; } function toggle() { //console.log("toggle_devid = " + devid); var p_topic = "app2dev/" + devid; if($('#switch').hasClass('btn_off')) { //console.log("toggle off, topic = " + p_topic); publish(p_topic, "on"); } else if ($('#switch').hasClass('btn_on')) { //console.log("toggle off, topic = " + p_topic); publish(p_topic, "off"); } } </source> <br><br> == Open API (HTTP in LAN) == <b style="color:#f00">Note: the device security policy using the WiFi router's password, that is: the users who are authorized to connect to the WiFi router, is a trusted user</b> Device start a HTTP service by default. You can send the following HTTP request to turn on or turn off the device. This way independent of MQTT cloud service can be used in local area network when you don't want to make device access Internet. <br> === Get the device IP === You can use the Fing app in iOS to scan the LAN network. The device named '''Espressif''' is your OpenPlug device: [[文件:Fing-lan-scan.png | 400px]] <br> === Turn On via HTTP in LAN === 192.168.1.75 is the openplug device IP Turn On: <source lang=bash> $ cat plug-on.txt POST /upnp/control/basicevent1 HTTP/1.1 Host: 192.168.1.69 Accept: */* Content-type: text/xml; charset="utf-8" Content-Length: 83 <?xml version="1.0" encoding="utf-8"?><s:Body><BinaryState>1</BinaryState></s:Body> $ cat plug-on.txt | nc 192.168.1.75 80 HTTP/1.0 200 OK Server: lwIP/1.4.0 Content-type: text/plain Content-Length: 0 Connection: close </source> <br> === Turn Off via HTTP in LAN === 192.168.1.75 is the openplug device IP Turn Off: <source lang=bash> $ cat plug-off.txt POST /upnp/control/basicevent1 HTTP/1.1 Accept: */* Content-type: text/xml; charset="utf-8" Content-Length: 83 <?xml version="1.0" encoding="utf-8"?><s:Body><BinaryState>0</BinaryState></s:Body> $ cat plug-off.txt | nc 192.168.1.75 80 HTTP/1.0 200 OK Server: lwIP/1.4.0 Content-type: text/plain Content-Length: 0 Connection: close </source> <br><br> == HomeBridge == To use the Siri to control the OpenPlug :) <br><br> == Alexa == '''Support Amazon Alexa:''' <br> === Discover === [[文件:Alexa-noduino-discove.png | 500px]] <br> === Turn On === [[文件:Alexa-openplug-turnon.png | 500px]] <br> === Turn Off === [[文件:Alexa-openplug-turnoff.png | 500px]] <br><br> == Hacking == === Prepare firmware === Get noduino-sdk: <source lang=bash> $ git clone --recursive git://github.com/icamgo/noduino-sdk.git noduino-sdk </source> Generate toolchain (you need Python 2.7): <source lang=bash> $ cd noduino-sdk/toolchain $ ./gen.py </source> Compile Open Plug firmware: <source lang=bash> $ cd ../sketch/open-plug $ make </source> The generated firmware is located in build/ dir named user1.bin annnd user2.bin Window environment please refer to [[Getting Started with Noduino SDK on Windows]], you can get how to setup the basic developmennt environment <br><br> === Upload === ==== Serial ==== [[文件:Openplug-fw-upload.jpg | 800px]] [[文件:Ft232.jpg | 800px]] * USB2UART_GND ------> SmartNode_GPIO0 * USB2UAR_GND -----> SmartNode_GND * USB2UAR_RXD -----> SmartNode_TX * USB2UAR_TXD -----> SmartNode_RX Connect USB2UAR_VCC3.3 -----> SmartNode_VCC at last ESP8285 will be enter upload mode, we can upload the compiled firmware through serial using following commands in Linux: <source lang=bash> $ cd /path/to/noduino-sdk/sketch/open-plug $ make produce ESPPORT=/dev/ttyUSB1 </source> In windows: <source lang=bash> $ make produce ESPPORT=COM7 </source> COM7 is your USB2UART device In MAC OS, maybe it's: <source lang=bash> $ make produce ESPPORT=/dev/cu.SLAB_USBtoUART </source> /dev/cu.SLAB_USBtoUART is your USB2UART device <br><br> ==== Online ==== ;; Access: http://dev.noduino.org/openplug ;; Login: * Username: noduino * password: noduino1234 ;; Click the "Add files", select the user1.bin and user2.bin located in /path/to/noduino-sdk/sketch/open-plug/build/ ;; Then click "Start upload" to upload the user1.bin and user2.bin into the server temporaily ;; Enter Official Account, then click "Add" menu, enter "Debug" page [[文件:Maike-upload-online-1.jpg | 450px]] ;; Select your device and the input "ota" in the data aera then click "send data" [[文件:Maike-upload-online-2.jpg | 450px]] Device will download your user1.bin or user2.bin and write it into flash when the device received the "ota" message You will see the device online message in the Debug page when the uploading is finished <br><br> == Hardware == [[文件:Open-plug-v0.8-sch.png | 900px]] [[文件:Open-plug-layout.png | 600px]] <br><br> == Reference == ;;For more information please refer to: * [[Noduino]] * Github: https://github.com/icamgo/noduino-sdk <br><br> <br><br> <br><br> <br><br> <br><br> <br><br> <br><br> <br><br> <br><br> <br><br> <br><br> <br><br> <br><br> <br><br>
返回到
Noduino OpenPlug
。
个人工具
18.118.27.125
该IP地址的讨论
登录
名字空间
页面
讨论
变换
查看
阅读
查看源代码
查看历史
操作
搜索
导航
首页
社区专页
新闻动态
最近更改
随机页面
帮助
工具箱
链入页面
相关更改
特殊页面