查看Noduino OpenOnoff的源代码

== Quick Start ==

[[文件:Open-onoff-4-en.jpg | 600px]]


[[文件:Maike-wifi-ctrl-2233-all-en.jpg]]


We need the WeChat to setup the OpenOnoff :)


* Power off, put the controller join circuit.

* Link OUTPUT port to the lamp or other electrical appliances under 1KW.

* Check the connection since it's 220V/110V. It would be best to reinforce the connection points with home insulation tape.

* Link INPUT port to the home electric supply. (Be Careful, suggest to off the home main breaker)

* Power on, controller will be waiting for network connection with indicator light flash slowly. (If there is no flash or flash quickly, please press the button for 10sec)

* Mobile connect to WiFi, scan the QR code in WeChat to connect network.

* Enter WiFi password, waiting for network connection. (P.S. only 2.4G WiFi is applicable, 5G WiFi and Enterprise - level security certifications are not supportable.)

* Finish WiFi configuration, WeChat will be in LAN devices matching mode with devices list visible.

* Click the first device then press "Link Device" button to bind the device. (P.S. if the device has been binding, then the button at bottom is "Enter Official Account"

* Finish above steps, please press "Enter Official Account" button then click "My Device" button to find your binding devices list. Click the device to enter control page.
  

If more people need to control the device, please connect to the same router and scan the same QR code while the device is power on.  Click "Device connected and skip" -> "Link Device"->"Enter Official Account" to control smart devices


;;Note:

* Press the button momentarily, manual switch controller

* Press the button 8sec, restore the factory settings.

<br><br>