查看Noduino NODEC的源代码
←
Noduino NODEC
跳转到:
导航
,
搜索
因为以下原因,你没有权限编辑本页:
您刚才请求的操作只有这个用户组中的用户才能使用:
用户
您可以查看并复制此页面的源代码:
== Update Firmware == Default firmware that the model upload is WeChat control 5 relay, 6 relay firmware can be write by your own Bootloader built in, the firmware can be uploaded through the serial port directly GPIO0 start up is normal; Pull down and then power up the module will automatically enter upgrade mode === Tools === The programming Interface were in the back of module. Use a 5-pin probe on Dupont line, connected to the USB switch TTL Panel, firmware can be upgrade then. [[文件:5pin.jpg]] One USB switch serial port board, we used a FT232RL breakout board / Noduino Falcon board [[文件:Ft232.jpg | 800px]] Wiring as below: * USB_GND ------> NODE_GPIO0 * USB_GND -----> NODE_GND * USB_RXD -----> NODE_TX * USB_TXD -----> NODE_RX Last but not least, USB_VCC3.3 -----> NODE_VCC power on, then enter upgrade mode <br><br> === Prepare Firmware === Fetch the noduino-sdk <source lang=bash> $ git clone --recursive git://github.com/icamgo/noduino-sdk.git noduino-sdk </source> Generate toolchain (you need Python 2.7) <source lang=bash> $ cd noduino-sdk/toolchain $ ./gen.py </source> Compile: <source lang=bash> $ cd ../sketch/ctrl6relay $ make </source> Noduino SDK usage under different platform please refer to: * [[Getting Started with Noduino SDK on Linux]] * [[Getting Started with Noduino SDK on Mac OS X]] * [[Getting Started with Noduino SDK on Windows]] <br><br> === Firmware upload === In sketch/ctrl5relay directory, 'make flash' directly: <source lang=bash> $ make produce </source> Firmware will be uploaded. Number of your serial port might be different in different platform, please confirm the device. For instance, FT232RL board may be identified as COM3 in Windows(check in device manager),then: <source lang=bash> $ make produce ESPPORT=COM3 </source> <br><br>
返回到
Noduino NODEC
。
个人工具
52.15.147.20
该IP地址的讨论
登录
名字空间
页面
讨论
变换
查看
阅读
查看源代码
查看历史
操作
搜索
导航
首页
社区专页
新闻动态
最近更改
随机页面
帮助
工具箱
链入页面
相关更改
特殊页面