查看Noduino OpenPlug的源代码

== Quick Start ==

[[文件:Maike-wifi-ctrl-2233-all-en.jpg]]


* Power on the plug, waiting 8s

* Light is flashing slowly means waiting for network matching

* If there is no flash, please press the button for 10sec.

* Mobile connect to 2.4G WiFi, scan the QR code in WeChat and click "Network Connection"

* Enter WiFi password and click "Connect" then waiting for network connection. (P.S. only 2.4G WiFi is applicable, 5G WiFi and Enterprise - level security certifications are not supportable.)

* Finish WiFi configuration, WeChat will be in LAN devices discovery mode with devices list visible.

* Click the first device then press "Like Device" button to bind the device. (P.S. if the device has been binding, then the button at bottom is "Enter Official Account")

* Finish above steps, please press "Enter Official Account" button then click "Devices" button to find your binding devices list. Click the device to enter control page.
 

If more people need to control the device, please connect to the same router and scan the same QR code while the device is power on.  Click "Device connected and skip" -> "Link Device"->"Enter Official Account" to control smart devices


;;Note:

* Press the button momentarily, manual switch controller

* Press the button for 10sec, restore the factory settings.

<br><br>