查看Noduino SHT2x的源代码

== 代码示例 ==

<source lang=cpp>
#include "noduino.h"
#include "sht2x.h"

void setup()
{
	serial_begin(115200);
	serial_printf("Start to test SHT2x sensor!\r\n");
	wire_begin();
}

void loop()
{
	char t_buf[8];
	char h_buf[8];

	sht2x_reset();
	serial_printf("After reset, User Reg = 0x%x\r\n", sht2x_read_reg());

	dtostrf(sht2x_GetTemperature(), 5, 2, t_buf),
	dtostrf(sht2x_GetHumidity(), 5, 2, h_buf);
	serial_printf("Temperature(C): %s\r\n", t_buf);
	serial_printf("Humidity(%RH): %s\r\n", h_buf);

	sht2x_setResolution(0x81);
	serial_printf("After set resolution, User Reg = 0x%x\r\n", sht2x_read_reg());

	dtostrf(sht2x_GetTemperature(), 5, 2, t_buf),
	dtostrf(sht2x_GetHumidity(), 5, 2, h_buf);
	serial_printf("Temperature(C): %s\r\n", t_buf);
	serial_printf("Humidity(%RH): %s\r\n", h_buf);

	delay(5000);
}
</source>


<br><br>