查看Noduino Partical的源代码

== 代码示例 ==

<source lang=cpp>
#include "noduino.h"

int dustVal = 0;
  
int ledPower = 16;
int delayTime = 280;
int delayTime2 = 40;
int offTime = 9680;

irom void setup()
{
	serial_begin(115200);

	//disable the wifi
	wifi_set_opmode(NULL_MODE);

	pinMode(ledPower,OUTPUT);
	digitalWrite(ledPower,HIGH);
	serial_printf("Sharp GP2Y1010AU0F Particle Sensor Example\r\n");
}

  
void loop()
{
	digitalWrite(ledPower,LOW); // power on the LED
	delayMicroseconds(delayTime);

	dustVal = system_adc_read(); // read the dust value via A0 pin
	delayMicroseconds(delayTime2);

	digitalWrite(ledPower,HIGH); // turn the LED off
	delayMicroseconds(offTime);
	  
	delay(3000);
	serial_printf("dush val = %d\r\n", dustVal);
}
</source>


More details:

* http://www.howmuchsnow.com/arduino/airquality/

<br><br>