ASR650x
来自Jack's Lab
(版本间的差异)
(→CY8CKIT-145-40xx) |
(→OpenOCD) |
||
第178行: | 第178行: | ||
<source lang=bash> | <source lang=bash> | ||
$ ./bin/openocd.exe -s ./scripts -f interface/jlink.cfg -c "transport select swd; source [find target/psoc4.cfg];" | $ ./bin/openocd.exe -s ./scripts -f interface/jlink.cfg -c "transport select swd; source [find target/psoc4.cfg];" | ||
+ | </source> | ||
+ | |||
+ | |||
+ | '''KitProg3:''' | ||
+ | |||
+ | <source lang=bash> | ||
+ | comca@AI-Workstation MINGW32 ~/work/nodetao/toolchain/openocd-cypress (master) | ||
+ | $ ./bin/openocd.exe -s ./scripts -f interface/kitprog3.cfg -c "transport select swd; source [find target/psoc4.cfg];" | ||
+ | Open On-Chip Debugger 0.10.0+dev-3.0.0.665 (2020-03-20-10:13) | ||
+ | Licensed under GNU GPL v2 | ||
+ | For bug reports, read | ||
+ | http://openocd.org/doc/doxygen/bugs.html | ||
+ | adapter speed: 2000 kHz | ||
+ | ** Auto-acquire enabled, use "set PSOC4_USE_ACQUIRE 0" to disable | ||
+ | cortex_m reset_config sysresetreq | ||
+ | Info : Listening on port 6666 for tcl connections | ||
+ | Info : Listening on port 4444 for telnet connections | ||
+ | Info : CMSIS-DAP: SWD Supported | ||
+ | Info : CMSIS-DAP: FW Version = 2.0.0 | ||
+ | Info : CMSIS-DAP: Interface Initialised (SWD) | ||
+ | Info : SWCLK/TCK = 1 SWDIO/TMS = 1 TDI = 0 TDO = 0 nTRST = 0 nRESET = 1 | ||
+ | Info : CMSIS-DAP: Interface ready | ||
+ | Info : KitProg3: FW version: 1.21.707 | ||
+ | Info : KitProg3: Pipelined transfers enabled | ||
+ | Info : VTarget = 4.968 V | ||
+ | Info : kitprog3: acquiring PSoC device... | ||
+ | Info : clock speed 2000 kHz | ||
+ | Info : SWD DPIDR 0x0bc11477 | ||
+ | Info : psoc4.cpu: hardware has 4 breakpoints, 2 watchpoints | ||
+ | Info : psoc4.cpu: external reset detected | ||
+ | ***************************************** | ||
+ | ** Silicon: 0x256A, Family: 0xB5, Rev.: 0x12 (A1) | ||
+ | ** Detected Device: CY8C4147AZI-S445 | ||
+ | ** Detected Family: PSoC 4100S Plus | ||
+ | ** Detected Main Flash size, kb: 128 | ||
+ | ** Chip Protection: protection OPEN | ||
+ | ***************************************** | ||
+ | Info : Listening on port 3333 for gdb connections | ||
</source> | </source> | ||
<br><br> | <br><br> |
2020年6月5日 (五) 15:40的版本
目录 |
1 ASR6505
- STM8L152
- Up to 16MHz
- 4KB RAM (0x0000 ~ 0x0FFF, including 513B stack)
- 2KB EEPROM (0x1000 ~ 0x1FFF)
- 64KB Flash (0x8080 ~ 0x1 7FFF)
- SPI x1, I2C x1, UART x2
- GPIO x30, ADC x3, SWIM x1
- 85mA @22dBm, 50mA@17dBm, 40mA@14dBm
- SX1262
- 2.4V to 3.7V (3.9V max) Power supply
- Sleep mode: 1uA without RTC, 1.6uA with RTC
- QFN68, 8x8mm
2 ASR6501
2.1 Overview
- PSoC 4100S Plus MCU
- 48 MHz ARM Cortex-M0+ Core
- up to 128kbytes of Flash memory and 16Kbytes of SRAM
- 6x configurable GPIOs, 1xI2C, 1xUART, 1xSWD
- 8-Channel DMA engine
- 12-bit 1Msps SAR ADC with differential and single-ended
- 32.768kHz External Watch Crystal Oscillator
- 4-33MHz External Crystal Oscillator for MCU (Optional)
- 32MHz External Crystal Oscillator for LoRa Radio
- Internal High frequency (48MHz) RC oscillator
- Internal Low frequency (40kHz) RC oscillator
- Internal PLL to generate 48MHz clock
- 1.71V to 5.5V Power supply
- Deep Sleep mode with 2.5uA
- SX1262
- 2.4V to 3.7V (3.9V max) Power supply
- Sleep mode: 2.7uA with RTC; 2uA without RTC
- QFN48 6x6mm
- 32-bit Arm® Cortex®-M0/M0+ PSoC® 4100 Intelligent Analog MCUs
- PSOC 4100s plus 256KB Datasheet
- PSOC 4100S Plus DatasheetENCN
- AN88619 - PSOC 4 HARDWARE DESIGN CONSIDERATIONS
2.2 RF-AL42UH
* P1 GND 电源地 * P2 VDD, 电源输入,范围 2.8V ~ 3.6V DC * P3 ADC_IN,ADC输入脚,程序未启用,悬空 * P4 GPIO,MCU GPIO,悬空 * P5 AUX,MCU GPIO,悬空 * P6 SETA,MCU GPIO,悬空 * P7 RXD,UART 的 RX 信号 * P8 TXD,UART 的 TX 信号 * P9 SWD,SWD DATA引脚 * P10 SCLK,SWD CLK引脚 * P11 I2C_SCL,I2C引脚,程序未启用,悬空 * P12 I2C_SDA,I2C引脚,程序未启用,悬空 * P13 SETB,MCU GPIO,悬空 * P14 CTS,悬空 * P15 RTS,悬空 * P16 RESET,复位引脚,低电平有效。无须拉高(内部已经拉高) * P17 GND 电源地 * P18 天线接口
3 KitProg
3.1 PSoC Programmer
- https://www.cypress.com/products/psoc-programming-solutions
- https://www.cypress.com/file/505286/download
3.2 CY8CKIT-145-40xx
插入 USB,Windows 下 'Devices and Printers' 显示 Cypress KitProg2
下载 fw-loader-2.3.1.610-windows.zip [1]
comca@AI-Workstation MINGW32 ~/work/asr6501/fw-loader $ ./bin/fw-loader.exe --device-list Cypress Firmware Updater, Version: 2.3.1.610 (C) Copyright 2018-2020 by Cypress Semiconductor All Rights Reserved Info: Start API initialization Info: Connected - KitProg2-131B0F7303105400 Info: Hardware initialization complete (515 ms) Connected supported devices: 1: KitProg2-131B0F7303105400 FW Version 1.1.0 $ ./bin/fw-loader.exe --update-kp3 Cypress Firmware Updater, Version: 2.3.1.610 (C) Copyright 2018-2020 by Cypress Semiconductor All Rights Reserved Info: Start API initialization Info: Connected - KitProg2-131B0F7303105400 Info: Hardware initialization complete (506 ms) Device 'KitProg2-131B0F7303105400' opened successfully Info: Kit FW is 'KitProg2' ver. 1.02 b000. Upgrade file is 'KitProg3' ver. 1.21 b707. Info: Disconnected - KitProg2-131B0F7303105400 Info: Connected - KitProg Bootloader-131B0F7303105400 Info: Bootloader Version: Major 1, Minor 1, Build 40 Info: FW Upgrade to version: 1.21 b707 Info: Bootloading of KitProg FW... Info: Verifying of KitProg FW... Info: Bootloading of DAPLink... Info: Verifying of DAPLink... Info: Upgrade completed Info: Disconnected - KitProg Bootloader-131B0F7303105400 Info: Connected - KitProg3 CMSIS-DAP BULK-131B0F7303105400 FW update completed successfully
3.3 CY8CKIT-043
插入 USB,Windows 下 'Devices and Printers' 显示 Cypress KitProg
fw-loader 发现不了
4 OpenOCD
STLink-V2:
comcat@AI-Workstation MINGW32 ~/work/nodetao/toolchain/openocd-cypress (master) $ ./bin/openocd.exe -s ./scripts -f interface/stlink.cfg -c "source [find target/psoc4.cfg]; targets; shutdown" Open On-Chip Debugger 0.10.0+dev-3.0.0.665 (2020-03-20-10:13) Licensed under GNU GPL v2 For bug reports, read http://openocd.org/doc/doxygen/bugs.html Info : auto-selecting first available session transport "hla_swd". To override use 'transport select <transport>'. adapter speed: 2000 kHz ** Test Mode acquire not supported by selected adapter Info : The selected transport took over low-level target control. The results might differ compared to plain JTAG/SWD TargetName Type Endian TapName State -- ------------------ ---------- ------ ------------------ ------------ 0* psoc4.cpu hla_target little psoc4.cpu unknown shutdown command invoked $ ./bin/openocd.exe -s ./scripts -f interface/stlink.cfg -c "program d:/BlinkyLED.hex verify reset; exit"
J-Link:
$ ./bin/openocd.exe -s ./scripts -f interface/jlink.cfg -c "transport select swd; source [find target/psoc4.cfg];"
KitProg3:
comca@AI-Workstation MINGW32 ~/work/nodetao/toolchain/openocd-cypress (master) $ ./bin/openocd.exe -s ./scripts -f interface/kitprog3.cfg -c "transport select swd; source [find target/psoc4.cfg];" Open On-Chip Debugger 0.10.0+dev-3.0.0.665 (2020-03-20-10:13) Licensed under GNU GPL v2 For bug reports, read http://openocd.org/doc/doxygen/bugs.html adapter speed: 2000 kHz ** Auto-acquire enabled, use "set PSOC4_USE_ACQUIRE 0" to disable cortex_m reset_config sysresetreq Info : Listening on port 6666 for tcl connections Info : Listening on port 4444 for telnet connections Info : CMSIS-DAP: SWD Supported Info : CMSIS-DAP: FW Version = 2.0.0 Info : CMSIS-DAP: Interface Initialised (SWD) Info : SWCLK/TCK = 1 SWDIO/TMS = 1 TDI = 0 TDO = 0 nTRST = 0 nRESET = 1 Info : CMSIS-DAP: Interface ready Info : KitProg3: FW version: 1.21.707 Info : KitProg3: Pipelined transfers enabled Info : VTarget = 4.968 V Info : kitprog3: acquiring PSoC device... Info : clock speed 2000 kHz Info : SWD DPIDR 0x0bc11477 Info : psoc4.cpu: hardware has 4 breakpoints, 2 watchpoints Info : psoc4.cpu: external reset detected ***************************************** ** Silicon: 0x256A, Family: 0xB5, Rev.: 0x12 (A1) ** Detected Device: CY8C4147AZI-S445 ** Detected Family: PSoC 4100S Plus ** Detected Main Flash size, kb: 128 ** Chip Protection: protection OPEN ***************************************** Info : Listening on port 3333 for gdb connections