软件无线电技术追踪民用航空器
来自Jack's Lab
(版本间的差异)
(→树莓派) |
(→树莓派) |
||
第34行: | 第34行: | ||
== 树莓派 == | == 树莓派 == | ||
− | < | + | <source lang=bash> |
$ sudo apt-get install git cmake libusb-1.0-0-dev build-essential | $ sudo apt-get install git cmake libusb-1.0-0-dev build-essential | ||
$ git clone git://git.osmocom.org/rtl-sdr.git | $ git clone git://git.osmocom.org/rtl-sdr.git | ||
第74行: | 第74行: | ||
$ rtl_tcp -a 10.0.1.50 | $ rtl_tcp -a 10.0.1.50 | ||
− | </ | + | </source> |
2017年10月26日 (四) 13:12的版本
目录 |
1 通用工具
http://www.sprut.de/electronic/pic/projekte/adsb/adsb_en.html
- rtl-sdr windows driver: http://rtlsdr.org/softwarewindows
2 天线
http://www.lll.lu/~edward/edward/adsb/antenna/ADSBantenna.html
3 PC 平台
工具:
- SDRSharp: http://sdrsharp.com/index.php/downloads
- rtl-sdr 笔记:http://ailin.phychembio.com/miscellany/967/
利用放在室內的天线和放大器,配合 RTL1090,將 1090MHz 的信号解码,然后利用 TCP 链接,将数据传入 COAA PlanePlotter 显示
4 树莓派
$ sudo apt-get install git cmake libusb-1.0-0-dev build-essential $ git clone git://git.osmocom.org/rtl-sdr.git $ mkdir -p rtl-sdr/build $ cd rtl-sdr/build $ cmake ../ $ make $ sudo make install $ sudo ldconfig copy the udev rules file into the etc/udev/rules.d # test commands $ lsusb Bus 001 Device 002: ID 0424:9512 Standard Microsystems Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. Bus 001 Device 004: ID 0bda:2838 Realtek Semiconductor Corp. RTL2838 DVB-T $ rtl_eeprom Found 1 device(s): 0: ezcap USB 2.0 DVB-T/DAB/FM dongle Using device 0: ezcap USB 2.0 DVB-T/DAB/FM dongle Found Rafael Micro R820T tuner Current configuration: __________________________________________ Vendor ID: 0x0bda Product ID: 0x2838 Manufacturer: Realtek Product: RTL2838UHIDIR Serial number: 00000013 Serial number enabled: yes IR endpoint enabled: yes Remote wakeup enabled: no __________________________________________ $ rtl_test -t $ rtl_tcp -a 10.0.1.50
http://rtlsdr.org/softwarelinux
http://sdrsharp.com/index.php/a-simple-and-cheap-ads-b-receiver-using-rtl-sdr
https://github.com/keenerd/rtl-sdr/blob/master/src/rtl_adsb.c
https://github.com/antirez/dump1090/blob/master/dump1090.c
http://www.satsignal.eu/raspberry-pi/dump1090.html
http://ferrancasanovas.wordpress.com/2013/09/26/dump1090-installation/