ADS-B
来自Jack's Lab
目录 |
1 Overview
http://www.sprut.de/electronic/pic/projekte/adsb/adsb_en.html
2 RTL SDR
2.1 zadig
Options ---> List All Devices, 选择 "Bulk-In, Interface (Interface 0)",USB ID 为:0BDA:2838,此为 RTL SDR 2832U 设备
zadig 用来将该设备驱动替换为 WinUSB
2.2 SDR #
2019-12-8 的版本里面带的 RTLSDR 驱动有问题,需用下面的替换之
2.3 RelWithDebInfo
http://sdr.osmocom.org/trac/raw-attachment/wiki/rtl-sdr/
解压后,将 RelWithDebInfo.zip\rtl-sdr-release\x32\ 下的 rtlsdr.dll 和 libusb-1.0.dll 复制到 SDR# 的目录下。
不论你的 window 是不是 32 位,都是这个。
2.4 dump1090
3 天线
http://www.lll.lu/~edward/edward/adsb/antenna/ADSBantenna.html
4 PC 平台
工具:
- dump1090
- SDRSharp: http://sdrsharp.com/index.php/downloads
- rtl-sdr 笔记:http://ailin.phychembio.com/miscellany/967/
利用放在室內的天线和放大器,配合 RTL1090,將 1090MHz 的信号解码,然后利用 TCP 链接,将数据传入 COAA PlanePlotter 显示
5 树莓派
$ sudo apt-get install git cmake libusb-1.0-0-dev build-essential $ git clone git://git.osmocom.org/rtl-sdr.git $ mkdir -p rtl-sdr/build $ cd rtl-sdr/build $ cmake ../ $ make $ sudo make install $ sudo ldconfig copy the udev rules file into the etc/udev/rules.d # test commands $ lsusb Bus 001 Device 002: ID 0424:9512 Standard Microsystems Corp. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp. Bus 001 Device 004: ID 0bda:2838 Realtek Semiconductor Corp. RTL2838 DVB-T $ rtl_eeprom Found 1 device(s): 0: ezcap USB 2.0 DVB-T/DAB/FM dongle Using device 0: ezcap USB 2.0 DVB-T/DAB/FM dongle Found Rafael Micro R820T tuner Current configuration: __________________________________________ Vendor ID: 0x0bda Product ID: 0x2838 Manufacturer: Realtek Product: RTL2838UHIDIR Serial number: 00000013 Serial number enabled: yes IR endpoint enabled: yes Remote wakeup enabled: no __________________________________________ $ rtl_test -t $ rtl_tcp -a 10.0.1.50
6 Reference
- http://sdrsharp.com/index.php/a-simple-and-cheap-ads-b-receiver-using-rtl-sdr
- https://github.com/antirez/dump1090/blob/master/dump1090.c
- http://www.satsignal.eu/raspberry-pi/dump1090.html
- https://github.com/keenerd/rtl-sdr/blob/master/src/rtl_adsb.c
- http://rtlsdr.org/softwarelinux
- http://ferrancasanovas.wordpress.com/2013/09/26/dump1090-installation/
- http://www.ads-b.com/slideshow.htm