2019年12月8日 (日) 00:16的最后版本

[编辑] 1 Overview

• RTL SDR Quick Start

[编辑] 1.1 zadig

• https://github.com/pbatard/libwdi/releases/download/b721/zadig-2.4.exe

Options ---> List All Devices, 选择 "Bulk-In, Interface (Interface 0)"，USB ID 为：0BDA:2838，此为 RTL SDR 2832U 设备

zadig 用来将该设备驱动替换为 WinUSB

[编辑] 1.2 SDR #

• https://sdrsharp.com/download/

2019-12-8 的版本里面带的 RTLSDR　驱动有问题，需用下面的替换之

[编辑] 1.3 RelWithDebInfo

http://sdr.osmocom.org/trac/raw-attachment/wiki/rtl-sdr/

解压后，将 RelWithDebInfo.zip\rtl-sdr-release\x32\ 下的 rtlsdr.dll 和 libusb-1.0.dll 复制到 SDR# 的目录下。

不论你的 window 是不是 32 位，都是这个。

[编辑] 2 通用工具

http://www.sprut.de/electronic/pic/projekte/adsb/adsb_en.html

• http://www.sprut.de/electronic/pic/projekte/adsb/adsb.htm

• rtl-sdr windows driver: http://rtlsdr.org/softwarewindows

[编辑] 3 天线

http://antirez.com/news/46

http://www.lll.lu/~edward/edward/adsb/antenna/ADSBantenna.html

[编辑] 4 PC 平台

工具：

• SDRSharp: http://sdrsharp.com/index.php/downloads

• rtl-sdr 笔记：http://ailin.phychembio.com/miscellany/967/

利用放在室內的天线和放大器，配合 RTL1090，將 1090MHz 的信号解码，然后利用 TCP 链接，将数据传入 COAA PlanePlotter 显示

[编辑] 5 树莓派

$ sudo apt-get install git  cmake libusb-1.0-0-dev build-essential
$ git clone git://git.osmocom.org/rtl-sdr.git
$ mkdir -p rtl-sdr/build
$ cd rtl-sdr/build
$ cmake ../
$ make
$ sudo make install
$ sudo ldconfig

copy the udev rules file into  the etc/udev/rules.d

# test commands
$ lsusb
Bus 001 Device 002: ID 0424:9512 Standard Microsystems Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp.
Bus 001 Device 004: ID 0bda:2838 Realtek Semiconductor Corp. RTL2838 DVB-T
$ rtl_eeprom
Found 1 device(s):
  0:  ezcap USB 2.0 DVB-T/DAB/FM dongle

Using device 0: ezcap USB 2.0 DVB-T/DAB/FM dongle
Found Rafael Micro R820T tuner

Current configuration:
__________________________________________
Vendor ID:              0x0bda
Product ID:             0x2838
Manufacturer:           Realtek
Product:                RTL2838UHIDIR
Serial number:          00000013
Serial number enabled:  yes
IR endpoint enabled:    yes
Remote wakeup enabled:  no
__________________________________________

$ rtl_test -t

$ rtl_tcp -a 10.0.1.50

http://rtlsdr.org/softwarelinux

http://sdrsharp.com/index.php/a-simple-and-cheap-ads-b-receiver-using-rtl-sdr

https://github.com/keenerd/rtl-sdr/blob/master/src/rtl_adsb.c

https://github.com/antirez/dump1090/blob/master/dump1090.c

http://www.satsignal.eu/raspberry-pi/dump1090.html

http://ferrancasanovas.wordpress.com/2013/09/26/dump1090-installation/