查看AZ-GTI的源代码
←
AZ-GTI
跳转到:
导航
,
搜索
因为以下原因,你没有权限编辑本页:
您刚才请求的操作只有这个用户组中的用户才能使用:
用户
您可以查看并复制此页面的源代码:
== Overview == * 信达 AZ-GTI [https://www.skywatcherusa.com/products/az-gti-mount 官网],自重 1.3kg,载重 5kg,电源 7-14V, 0.75A * [http://bbs.imufu.cn/forum.php?mod=viewthread&tid=777687 信达AZ-gti经纬仪开光] * [http://bbs.imufu.cn/forum.php?mod=viewthread&tid=782687 信达AZGTI赤道仪模式测试兼开光] * [http://bbs.imufu.cn/forum.php?mod=viewthread&tid=786179 az-gti更新az-eq固件和通过计算机控制教程] * [http://zwoasi.com/photography-guidance/asiair%E4%B8%8E%E4%BF%A1%E8%BE%BEaz-gti%E7%BB%8F%E7%BA%AC%E4%BB%AA%E6%90%AD%E9%85%8D%E4%BD%BF%E7%94%A8%E6%8C%87%E5%8D%97.html ASIAIR与信达AZ-GTI经纬仪搭配使用指南] <br> == Firmware == http://www.skywatcher.com/download/software/motor-control-firmware/ <br> == Hack == * 主控: STM32F51R8T6 [[STM32]] ** Power Supply: 2 - 3.6V (4V max) ** PIN1/13/32/64 --- 3.3V ** PIN12/31/63 --- GND ** PIN46 --- SWDIO ** PIN49 --- SWCLK ** PIN60 (BOOT0) --- R11 (10K) --- J4 --- 3.3V * WiFi: ESP8266 官方模块(串口透传) ** EN --- PIN54 ** IO15 (need pull-down) --- PIN53 ** IO2 (need pull-up) --- PIN52 ** IO0 (need pull-up) --- PIN51 ** RXD --- PIN16 (USART2_TX) ** TXD --- PIN17 (USART2_RX) ** RST --- C2 ---GND <br> == ESP8266 == [[文件:Raspi-esp8089.png]] Note that the CH_PD signal is connected to the ID_SD signal. This must be mapped as a GPIO (GPIO0) and switched to an output and driven low then switched to an input again before the driver is loaded in order to reset the module. This will be added in the near future in the driver. https://github.com/al177/esp8089 https://hackaday.io/project/8678/instructions?page=1 <br><br>
返回到
AZ-GTI
。
个人工具
3.138.172.82
该IP地址的讨论
登录
名字空间
页面
讨论
变换
查看
阅读
查看源代码
查看历史
操作
搜索
导航
首页
社区专页
新闻动态
最近更改
随机页面
帮助
工具箱
链入页面
相关更改
特殊页面