AZ-GTI

来自Jack's Lab
(版本间的差异)
跳转到: 导航, 搜索
(Hack)
(ESP8266)
第38行: 第38行:
  
 
<br>
 
<br>
 
== ESP8266 ==
 
 
[[文件:Raspi-esp8089.png]]
 
 
 
Note that the CH_PD signal is connected to the ID_SD signal. This must be mapped as a GPIO (GPIO0) and switched to an output and driven low then switched to an input again before the driver is loaded in order to reset the module. This will be added in the near future in the driver.
 
 
https://github.com/al177/esp8089
 
 
https://hackaday.io/project/8678/instructions?page=1
 
 
<br><br>
 

2021年5月26日 (三) 17:59的版本

1 Overview

  • 信达 AZ-GTI 官网,自重 1.3kg,载重 5kg,电源 7-14V, 0.75A


2 Firmware

http://www.skywatcher.com/download/software/motor-control-firmware/


3 Hack

  • 主控: STM32F51R8T6 STM32
    • Power Supply: 2 - 3.6V (4V max)
    • PIN1/13/32/64 --- 3.3V
    • PIN12/31/63 --- GND
    • PIN46 --- SWDIO
    • PIN49 --- SWCLK
    • PIN60 (BOOT0) --- R11 (10K) --- J4 --- 3.3V


  • WiFi: ESP8266 官方模块(串口透传)
    • EN --- PIN54
    • IO15 (need pull-down) --- PIN53
    • IO2 (need pull-up) --- PIN52
    • IO0 (need pull-up) --- PIN51
    • RXD --- PIN16 (USART2_TX)
    • TXD --- PIN17 (USART2_RX)
    • RST --- C2 ---GND


个人工具
名字空间

变换
操作
导航
工具箱