查看EFM32的源代码
←
EFM32
跳转到:
导航
,
搜索
因为以下原因,你没有权限编辑本页:
您刚才请求的操作只有这个用户组中的用户才能使用:
用户
您可以查看并复制此页面的源代码:
== Overview == <br><br> == QuickStart == * http://tomu.im/samples * https://github.com/im-tomu/tomu-quickstart/ <br><br> == Basic == * 刷入一个 Bootloader --- [https://github.com/im-tomu/toboot toboot] * 使用 [https://github.com/arduino/dfu-utils-cross dfu-utils] 从 USB 口刷入固件程序... * arduino core: https://github.com/todbot/ArduinoCore-EFM32 <br> === Flashing the toboot === Brand-new EFM32HG will not have Toboot installed. Instead, they might have the SiLabs AN0042 bootloader. The recommend way to load the bootloader onto a Chip is using a Raspberry Pi with OpenOCD. Instructions for doing this can be found in the openocd directory. You need OpenOCD version 0.10.0 or later to have EFM32HG support. Tomu can be powered using the 3.3V pin, so you can create a sort of "programming wand" by bringing 3.3V, GND, SCK, and SIO out to a 0.1" header, running openocd in a loop, and touching the programming pins on the side of a Tomu board. The process only takes a few seconds, so contact doesn't have to be great. <br> === Install dfu-util === The dfu-util suite of programs is used to talk to Toboot '''Ubuntu and Debian''' sudo apt-get install dfu-util Create /etc/udev/rules.d/10-tomu.rules and populate it with the following: ATTRS{idProduct}=="70b1", ATTRS{idVendor}=="1209", MODE="777" (Note: you can give it a more restrictive mode if you also give it a group that you’re in) '''Windows''' Download dfu-util-static.exe from the dfu-util repository and rename it to dfu-util.exe. Place it somewhere in your $PATH for convenience. To build examples, you’ll also want to get dfu-suffix.exe and put it in your $PATH. '''Mac''' Install Homebrew and run: brew install dfu-util <br> <br><br> <br><br>
返回到
EFM32
。
个人工具
登录
名字空间
页面
讨论
变换
查看
阅读
查看源代码
查看历史
操作
搜索
导航
首页
社区专页
新闻动态
最近更改
随机页面
帮助
工具箱
链入页面
相关更改
特殊页面