ESP8266 Debug Notes
来自Jack's Lab
1 Fatal Exception 0
ets Jan 8 2013,rst cause:1, boot mode:(3,7) load 0x40100000, len 27700, room 16 tail 4 chksum 0x76 load 0x3ffe8000, len 992, room 4 tail 12 chksum 0xa9 ho 0 tail 12 room 4 load 0x3ffe83e0, len 5084, room 12 tail 0 chksum 0xee csum 0xee Fatal exception (0): epc1=0x4024097c, epc2=0x00000000, epc3=0x00000000, excvaddr=0x00000000, depc=0x00000000 Fatal exception (0): epc1=0x4024097c, epc2=0x00000000, epc3=0x00000000, excvaddr=0x00000000, depc=0x00000000 Fatal exception (0): epc1=0x4024097c, epc2=0x00000000, epc3=0x00000000, excvaddr=0x00000000, depc=0x00000000 Fatal exception (0): ...... ......
2 Reset issue
AirKiss 配置成功后,MQTT: Published,然后就重启了。。。
TYPE: AIRKISS T|sniffer on ch:7 SC_STATUS_GETTING_SSID_PSWD SC_TYPE:SC_TYPE_AIRKISS Store the ssid and password into flash f r-1, scandone state: 0 -> 2 (b0) state: 2 -> 3 (0) state: 3 -> 5 (10) connected with Noduino-AP channel 7 dhcp client start... cnt ip:192.168.5.73,mask:255.255.255.0,gw:192.168.5.1 TCP: Connect to ip 101.200.202.247:1883 MQTT: Connected to broker 101.200.202.247:1883 MQTT: Sending, type: 1, id: 0000 TCP: Sent TCP: data received 4 bytes MQTT: Connected to 101.200.202.247:1883 MQTT: Connected MQTT: queue subscribe, topic"/app2dev/gh_95fae12220_04063fb88d9a8e47", id: 1 MQTT: queuing publish, length: 64, queue size(66/2048) MQTT: Sending, type: 8, id: 0001 TCP: Sent TCP: data received 5 bytes MQTT: Subscribe successful MQTT: Sending, type: 3, id: 0000 TCP: Sent MQTT: Published SC_STATUS_LINK_OVER free heap size:40424 state: 5 -> 0 (0) rm 0 del if0 usl TCP: Reconnect to 101.200.202.247:1883 ets Jan 8 2013,rst cause:1, boot mode:(3,0) ...... ......