查看Eagle Tips的源代码
←
Eagle Tips
跳转到:
导航
,
搜索
因为以下原因,你没有权限编辑本页:
您刚才请求的操作只有这个用户组中的用户才能使用:
用户
您可以查看并复制此页面的源代码:
== Notes == * 力创的喷锡 PCB,2.54mm 的插针,钻孔必须为 0.9mm,0.7mm 的只能用在镀金板上!2.54mm间距的母座可用0.7mm的喷锡孔 * 力创的丝印,最小最好为 24mil, Ratio 14% * Eagle Lib: 封装的 name 和 value 建议字符格式:vector, 16mil 8% / 50mil, 8% * 力创开卡槽,可能用的 0.5mm 的铣刀,因此如果是 5mm x 1mm 的槽,最好开成 5.5 - 6 mm x 1mm <br><br> == Change Fonts == Two steps: First smash all the parts to make sure you can access the part names, then change the font and ratio. To smash all the parts, try: display none tOrigin bOrigin; group all; smash (>0 0); display last; To change the font and ratio, try: display none tNames bNames; group all; change font vector (>0 0); change ratio 15 (>0 0); display last; <br><br> == Export wiki == Run the DP_Exporter.ulp to create Board and Schematic PNG, a HTML table and WIKI table format: * Load a board (You must be in the board screen, not in schematic to run the script) * From File->Run load up DP_Exporter.ulp <br><br> == Export BOM from brd == Run the 204BRD2XLS.ULP to create the BOM list of the *.brd file <br><br> == Export Silkscreen to PDF == Open *.brd file === Top === <pre> display none tNames Dimension print </pre> <br> === Bottom === <pre> display none bNames Dimension print </pre> <br><br> == Export mnt == run mountsmt.ulp <br><br> == 过孔和线宽与电流关系 == 铜厚 1oz,线宽单位 mil 上升10摄氏度 * 6mil 0.2A * 8mil 0.55A * 12mil 0.8A * 16mil 1.1A 设计时需要小于该值的一半考虑。 过孔的对应的导线宽度为焊盘边缘宽度,即10mil的孔,16mil的焊盘外径则对应6mil的导线。 RT5350F全开时电流为280mA,约为3.3V * 0.28A = 0.924W 其中天线发射功率为100mW,大概40mA的电流,用6mil的导线就够了。 接地过孔必须可以承受约0.5A的电流,所以16mil的过孔至少要6个,越多越好 <br><br>
返回到
Eagle Tips
。
个人工具
登录
名字空间
页面
讨论
变换
查看
阅读
查看源代码
查看历史
操作
搜索
导航
首页
社区专页
新闻动态
最近更改
随机页面
帮助
工具箱
链入页面
相关更改
特殊页面