Getting Started with Noduino SDK on Linux
来自Jack's Lab
(版本间的差异)
(→下载 Noduino SDK) |
|||
第20行: | 第20行: | ||
<br><br> | <br><br> | ||
− | == | + | == 尝试 Noduino SDK == |
<source lang=bash> | <source lang=bash> |
2015年11月11日 (三) 16:06的版本
1 准备
准备一块 Noduino Falcon / nodemcu v1.0 开发板,一根 micro USB 连接线:
开发板使用 CP2102 这颗 USB 转串口芯片,Linux 系统下无需额外安装驱动,插上开发板后,系统自动将其识别为 /dev/ttyUSB0 这个串口设备:
comcat@jackslab:/work/xwifi/noduino$ dmesg|tail -n 6 [254109.926619] usb 4-1: Product: CP2102 USB to UART Bridge Controller [254109.926625] usb 4-1: Manufacturer: Silicon Labs [254109.926630] usb 4-1: SerialNumber: 0001 [254109.931456] cp210x 4-1:1.0: cp210x converter detected [254110.044391] usb 4-1: reset full-speed USB device number 22 using uhci_hcd [254110.192809] usb 4-1: cp210x converter now attached to ttyUSB0
2 尝试 Noduino SDK
# clone the whole sdk $ git clone git://github.com/icamgo/noduino-sdk.git noduino-sdk # fetch the toolchain of esp8266 $ cd noduino-sdk $ git submodule init $ git submodule update $ cd toolchain $ ./gen.py # generate the toolchain (you need Python 2.7)
尝试点灯的例子
# try the first example $ cd ../example/blink $ make # upload the example to dev board through serial $ make flash
上传完之后,你会很快看到板子靠近 USB 口的 LED 开始在慢闪(大概 1s 间隔)