Getting Started with Noduino SDK on Windows
来自Jack's Lab
(版本间的差异)
(→尝试 Noduino SDK) |
(→概述) |
||
第1行: | 第1行: | ||
− | == | + | == 准备 == |
− | + | 准备一块 Noduino Falcon / nodemcu v1.0 开发板,一根 micro USB 连接线: | |
− | + | [[文件:Nodemcu-v1.0-board.jpg | 600px]] | |
− | + | ||
+ | 开发板使用 CP2102 这颗 USB 转串口芯片,到芯片厂家官网下载 Windows 版的驱动:http://www.silabs.com/products/mcu/Pages/USBtoUARTBridgeVCPDrivers.aspx | ||
+ | |||
+ | |||
+ | 安装完成后,系统会发现开发板的串口端口为 COM6: | ||
+ | |||
+ | [[文件:Nodemcu-win-driver5.jpg | 600px]] | ||
<br><br> | <br><br> |
2015年11月26日 (四) 16:38的版本
目录 |
1 准备
准备一块 Noduino Falcon / nodemcu v1.0 开发板,一根 micro USB 连接线:
开发板使用 CP2102 这颗 USB 转串口芯片,到芯片厂家官网下载 Windows 版的驱动:http://www.silabs.com/products/mcu/Pages/USBtoUARTBridgeVCPDrivers.aspx
安装完成后,系统会发现开发板的串口端口为 COM6:
2 准备
先安装必要的工具
- 安装 Git for windows
- 安装 python 2.7
3 尝试 Noduino SDK
# clone the whole sdk $ git clone git://github.com/icamgo/noduino-sdk.git noduino-sdk # fetch the toolchain of esp8266 $ cd noduino-sdk $ git submodule init $ git submodule update $ cd toolchain/dist $ wget http://noduino.org/toolchain/win32-xtensa-lx106-elf-gb404fb9-2.tar.gz $ cd .. $ ./gen.py # generate the toolchain (you need Python 2.7)
尝试点灯的例子
# try the first example $ cd ../example/noduino/blink # upload the example to dev board through serial $ make flash
上传完之后,你会很快看到板子靠近 USB 口的 LED 开始在慢闪(大概 2s 间隔)
4 扩展阅读
产品级开发建议使用我们的专业 SDK:
- Getting Started with Noduino SDK on Linux
- Getting Started with Noduino SDK on Mac OS X
- Getting Started with Noduino SDK on Windows
学习、研究、创客可以尝试:
- Getting Started with Noduino on Linux
- Getting Started with Noduino on Mac OS X
- Getting Started with Noduino on Windows
- ESP8266 的各种问题参考: