Noduino BMP085

来自Jack's Lab
跳转到: 导航, 搜索

目录

1 开发环境准备

根据您的系统,选择如下快速指南:




2 硬件准备

此传感器为 I2C 接口,Falcon 接线方式如下:

  • Sensor_SCL --> Noduino_Falcon_D9
  • Sensor_SDA --> Noduino_Falcon_D8


  • Sensor_3V3 --> Noduino_Falcon_3V3
  • Sensor_GND --> Noduino_Falcon_GND


NodeC / SmartNode 接线方式如下:

  • Sensor_SCL --> SmartNode_IO5
  • Sensor_SDA --> SmartNode_IO4


  • Sensor_3V3 --> SmartNode_3V3
  • Sensor_GND --> SmartNode_GND



3 编译烧写

进入你的 bmp085 目录:

$ cd /PATH/TO/noduino-sdk/examples/noduino/bmp085


编译、上传一步完成:

$ make flash

不同平台下,你的串口设备号可能不一样,确认一下你的串口设备,Linux 下 Falcon 开发板可能被识别为 /dev/ttyUSB1(dmesg 查看),则:

$ make flash ESPPORT=/dev/ttyUSB1


Windows 下 Falcon 开发板可能被识别为 COM6(控制面板 --> 设备管理器里查看),则:

$ make flash ESPPORT=COM6



4 查看结果

上传完之后,用串口工具,用 115200 的波特率打开串口,即可看到串口在持续输出传感器测得的值:


Windows 下可用串口调试助手这类插看


Linux 下推荐使用 picocom:

$ sudo apt-get install picocom
$ picocom -b 115200 /dev/ttyUSB1
picocom v1.7

port is        : /dev/ttyUSB2
flowcontrol    : none
baudrate is    : 115200
parity is      : none
databits are   : 8
escape is      : C-a
local echo is  : no
noinit is      : no
noreset is     : no
nolock is      : no
send_cmd is    : sz -vv
receive_cmd is : rz -vv
imap is        : 
omap is        : 
emap is        : crcrlf,delbs,

Terminal ready

......
......


Ctrl + a q 退出 picocom




5 代码示例

#include "noduino.h"
#include "bmp085.h"

irom void setup()
{
	serial_begin(115200);

	if (!bmp085_begin()) {
		serial_print("Could not find a valid BMP085 sensor,\
						check wiring!\r\n");

		while (1) {}
	}
}
  
void loop()
{
	char obuf[16];

	serial_printf("Pressure = \t\t\t%d Pa\r\n", bmp085_readPressure());

	dtostrf(bmp085_readTemperature(), 16, 2, obuf);
	serial_printf("Temperature = \t\t%s C\r\n", obuf);

	// Calculate altitude assuming 'standard' barometric
	// pressure of 1013.25 millibar = 101325 Pascal
	serial_printf("Pressure at sealevel (calculated) = %d Pa\r\n",
			bmp085_readSealevelPressure(30));

	// you can get a more precise measurement of altitude
	// if you know the current sea level pressure which will
	// vary with weather and such. If it is 1015 millibars
	// that is equal to 101500 Pascals.
	dtostrf(bmp085_readAltitude(102300), 16, 2, obuf);
	serial_printf("Real altitude = \t%s M\r\n\r\n", obuf);

	delay(3000);
}




6 扩展阅读

更多问题参考:








个人工具
名字空间

变换
操作
导航
工具箱