Noduino Hello World
来自Jack's Lab
目录 |
1 开发环境准备
根据您的系统,选择如下快速指南:
- Getting Started with Noduino SDK on Linux
- Getting Started with Noduino SDK on Mac OS X
- Getting Started with Noduino SDK on Windows
2 Hello World
尝试 hello world 的例子,进入你的 noduino-sdk 目录:
$ cd /PATH/TO/noduino-sdk/examples/noduino/hello
编译、上传一步完成:
$ make flash
不同平台下,你的串口设备号可能不一样,确认一下你的串口设备,Linux 下 Falcon 开发板可能被识别为 /dev/ttyUSB1(dmesg 查看),则:
$ make flash ESPPORT=/dev/ttyUSB1
Windows 下 Falcon 开发板可能被识别为 COM6(控制面板 --> 设备管理器里查看),则:
$ make flash ESPPORT=COM6
3 查看
上传完之后,用串口工具,用 115200 的波特率打开串口,即可看到串口在持续输出 "Hello World"
Linux 下推荐使用 picocom:
$ sudo apt-get install picocom $ picocom -b 115200 /dev/ttyUSB1
4 扩展阅读
- 更多问题参考: