Noduino NODEC
目录 |
1 Overview
- Super mini, 15.5mm*17.8mm, 1 cent coin size
- ESP8285, built in 1MB Flash
- 2nd generation WiFi IoT model, independent WiFi nodes (MCU not necessary)
- 3.3v power supply
- Support up to 6 relay, sensor and OLED
2 Quick Start
Link 3.3V power supply (600mA output) to VCC&GND that is on the back of model;
Power on, the model will auto detect Wifi. If there is no available router can be detected, the model will be waiting for network connection. Please follow below indication to connect WiFi.
2.1 Setup WiFi
Make sure that your phone is connected to your WiFi router.
Scan the QR code in WeChat
Coming to below page:
Click "Connecting Network" button:
Enter WiFi password then click "Connect" to complete WiFi connection. (NOTE, this network connection model only apply to 2.4G router, unapplicable for neither 5G router nor Enterprise level security certification.
2.2 Link Device
Complete WiFi connection, WeChat will auto detect linkable devices in current routed environment and list them:
1st device, la
