Noduino OpenOnoff

来自Jack's Lab
(版本间的差异)
跳转到: 导航, 搜索
(Prepare firmware)
(Serial)
第78行: 第78行:
 
Connect USB2UAR_VCC3.3 -----> SmartNode_VCC at last
 
Connect USB2UAR_VCC3.3 -----> SmartNode_VCC at last
  
ESP8285 will be enter upload mode, we can upload the compiled firmware through serial using following commands:
+
ESP8285 will be enter upload mode, we can upload the compiled firmware through serial using following commands in Linux:
  
 
<source lang=bash>
 
<source lang=bash>
 
$ cd /path/to/noduino-sdk/sketch/open-onoff
 
$ cd /path/to/noduino-sdk/sketch/open-onoff
 
$ make produce ESPPORT=/dev/ttyUSB1
 
$ make produce ESPPORT=/dev/ttyUSB1
 +
</source>
 +
 +
 +
In windows:
 +
 +
<source lang=bash>
 +
$ make produce ESPPORT=COM7
 +
</source>
 +
 +
COM7 is your USB2UART device
 +
 +
 +
In MAC OS, maybe it's:
 +
 +
<source lang=bash>
 +
$ make produce ESPPORT=/dev/cu.SLAB_USBtoUART
 +
 +
/dev/cu.SLAB_USBtoUART is your USB2UART device
 +
 
</source>
 
</source>
  

2016年10月25日 (二) 01:25的版本

目录

1 Overview

Open-onoff-3.jpg

Open-onoff-2.jpg


  • AC 85V - 250V General Power Switch
  • ESP8285 inside
  • 250V 10A relay
  • Mainboard size 53mm x 28mm x 17.8mm(H)
  • Shell size 63mm x 33mm x 21mm(H)





2 Quick Start

Open-onoff-4-en.jpg



3 Open API



4 Hacking

4.1 Prepare firmware

Get noduino-sdk:

$ git clone --recursive git://github.com/icamgo/noduino-sdk.git noduino-sdk


Generate toolchain (you need Python 2.7):

$ cd noduino-sdk/toolchain
$ ./gen.py

Compile the firmware:

$ cd ../sketch/open-onoff
$ make


The generated firmware is located in build/ dir named user1.bin annnd user2.bin


Window environment please refer to Getting Started with Noduino SDK on Windows, you can get how to setup the basic developmennt environment



4.2 Upload

4.2.1 Serial

5pin.jpg


Ft232.jpg


  • USB2UART_GND ------> SmartNode_GPIO0
  • USB2UAR_GND -----> SmartNode_GND
  • USB2UAR_RXD -----> SmartNode_TX
  • USB2UAR_TXD -----> SmartNode_RX


Connect USB2UAR_VCC3.3 -----> SmartNode_VCC at last

ESP8285 will be enter upload mode, we can upload the compiled firmware through serial using following commands in Linux:

$ cd /path/to/noduino-sdk/sketch/open-onoff
$ make produce ESPPORT=/dev/ttyUSB1


In windows:

$ make produce ESPPORT=COM7

COM7 is your USB2UART device


In MAC OS, maybe it's:

$ make produce ESPPORT=/dev/cu.SLAB_USBtoUART

/dev/cu.SLAB_USBtoUART is your USB2UART device



4.2.2 Online



5 Hardware

OpenOnoff-V1.0-sch.png]


OpenOnoff-V1.0-layout.png





























个人工具
名字空间

变换
操作
导航
工具箱