Noduino OpenOnoff

来自Jack's Lab
(版本间的差异)
跳转到: 导航, 搜索
(Open API)
(HomeBridge)
第216行: 第216行:
 
== HomeBridge ==
 
== HomeBridge ==
  
To use the Siri to control the OpenPlug :)
+
To use the Siri to control the device :)
  
 
<br><br>
 
<br><br>

2016年11月5日 (六) 22:55的版本

目录

1 Overview

Open-onoff-3.jpg

Open-onoff-2.jpg


  • AC 85V - 250V General Power Switch
  • ESP8285 inside
  • 250V 10A relay
  • Mainboard size 53mm x 28mm x 17.8mm(H)
  • Shell size 63mm x 33mm x 21mm(H)





2 Quick Start

Open-onoff-4-en.jpg


Maike-wifi-ctrl-2233-all-en.jpg


We need the WeChat to setup the OpenOnoff :)


  • Power off, put the controller join circuit.
  • Link OUTPUT port to the lamp or other electrical appliances under 1KW.
  • Check the connection since it's 220V/110V. It would be best to reinforce the connection points with home insulation tape.
  • Link INPUT port to the home electric supply. (Be Careful, suggest to off the home main breaker)
  • Power on, controller will be waiting for network connection with indicator light flash slowly. (If there is no flash, please press the button for 10sec)
  • Mobile connect to WiFi, scan the QR code in WeChat to connect network.
  • Enter WiFi password, waiting for network connection. (P.S. only 2.4G WiFi is applicable, 5G WiFi and Enterprise - level security certifications are not supportable.)
  • Finish WiFi configuration, WeChat will be in LAN devices matching mode with devices list visible.
  • Click the first device then press "Link Device" button to bind the device. (P.S. if the device has been binding, then the button at bottom is "Enter Official Account"
  • Finish above steps, please press "Enter Official Account" button then click "My Device" button to find your binding devices list. Click the device to enter control page.


If more people need to control the device, please connect to the same router and scan the same QR code while the device is power on. Click "Device connected and skip" -> "Link Device"->"Enter Official Account" to control smart devices


Note
  • Press the button momentarily, manual switch controller
  • Press the button 10sec, restore the factory settings.



3 Open API

Afer you guys 'Link Device' in WeChat, Enter Official Account:


  • click "Devices" to list your binding devices
  • select yourdevice in the list, enter control page, click upright corner, then Copy URL
  • paste the URL into web browser (Chrome or Safari) to access the control page in browser
  • check the source code of the page to get the following variables:


<?php
echo 'var devid = "' . $devid . '";';
echo 'var mqtt_uname = "' . $openid . '";';
echo 'var mqtt_pass = "' . $token . '";';
echo 'var mqtt_server = "' . $_GET['m2mip'] . '";';
echo 'var mqtt_port = ' . $_GET['m2mport'] . ';';
?>


The device control page in WeChat is a H5 page. Using a MQTT client implement in javascript , using the mqttws31.js library:

var client_id = parseInt(Math.random() * 10000, 10) + '_' + mqtt_uname;
var client = new Paho.MQTT.Client(mqtt_server, mqtt_port, "/mqtt", client_id);
var state = 0;
function failConnect(e) {
	console.log("connect failed");
	console.log(e);
	console.log("reconnecting ...");
	client.connect({userName: mqtt_uname, password: mqtt_pass, onSuccess:onConnect, onFailure: failConnect, mqttVersion:3});
}
function onConnect() {
	console.log("onConnect OK!");
	subscribe('dev2app/' + devid);
}
function subscribe(topic) {
	client.subscribe(topic);
}
function onMessageArrived (message) {
	// MQTT message from device example: {"m":"status","d":"on","t":"2015-12-30T00:00:00+08:00"}
	console.log("Arrived Message: [", message.payloadString, "]");
	try {
		job = JSON.parse(message.payloadString);
		state = job.d;
	} catch(e) {
		console.log("JSON object error!");
		alert("JSON error, RX data is: " + message.payloadString);
		return;
	}
	if(state == 'on') {
		$('#switch').removeClass('btn_off');
		$('#switch').addClass('btn_on');
	} else if (state == 'off') {
		$('#switch').removeClass('btn_on');
		$('#switch').addClass('btn_off');
	}
}
function onDisConnect() {
	console.log("reconnecting ...");
	client.connect({userName: mqtt_uname, password: mqtt_pass, onSuccess:onConnect, onFailure: failConnect, mqttVersion:3});
}
function publish(topic, msg){
	message = new Paho.MQTT.Message(msg);
	message.destinationName = topic;
	client.send(message);
	console.log("publish message ok!");
}
function init() {
	client.connect({userName: mqtt_uname, password: mqtt_pass, onSuccess:onConnect, onFailure: failConnect, mqttVersion:3});
	client.onMessageArrived = onMessageArrived;
	client.onConnectionLost = onDisConnect;
}
function toggle()
{
	//console.log("toggle_devid = " + devid);
	var p_topic = "app2dev/" + devid;
	if($('#switch').hasClass('btn_off')) {
		//console.log("toggle off, topic = " + p_topic);
		publish(p_topic, "on");
	} else if ($('#switch').hasClass('btn_on')) {
		//console.log("toggle off, topic = " + p_topic);
		publish(p_topic, "off");
	}
}


Using the node.js to switch off the OpenOnoff:

$ sudo npm install -g MQTTClient
$ cat switch-off.js
#! /usr/bin/env node

var opt = {
    username: "YOUR_mqtt_uname",
    password: "YOUR_mqtt_pass"
};

var MQTTClient = require('MQTTClient').Client;

var client = new MQTTClient('YOUR_mqtt_server', 1883, opt);

client.connect(function () {
    console.log("connect ok!");

    var pubopt = {
        qos_level:  2
    }

    client.publish('app2dev/YOUR_DEVICE_ID', 'off', pubopt, function (message_id) {    <-------- Send the 'off' to device
        console.log("public ok! message_id = " + message_id);
    });
});

$ ./switch-off.js


Turn on the OpenOnoff :

$ cat switch-on.js
#! /usr/bin/env node

var opt = {
    username: "YOUR_mqtt_uname",
    password: "YOUR_mqtt_pass"
};

var MQTTClient = require('MQTTClient').Client;

var client = new MQTTClient('YOUR_mqtt_server', 1883, opt);

client.connect(function () {
    console.log("connect ok!");

    var pubopt = {
        qos_level:  2
    }

    client.publish('app2dev/YOUR_DEVICE_ID', 'on', pubopt, function (message_id) {    <-------- Send the 'on' to device
        console.log("public ok! message_id = " + message_id);
    });
});

$ ./switch-on.js



4 HomeBridge

To use the Siri to control the device :)



5 Hacking

5.1 Prepare firmware

Get noduino-sdk:

$ git clone --recursive git://github.com/icamgo/noduino-sdk.git noduino-sdk


Generate toolchain (you need Python 2.7):

$ cd noduino-sdk/toolchain
$ ./gen.py

Compile the firmware:

$ cd ../sketch/open-onoff
$ make


The generated firmware is located in build/ dir named user1.bin annnd user2.bin


Window environment please refer to Getting Started with Noduino SDK on Windows, you can get how to setup the basic developmennt environment



5.2 Upload

5.2.1 Serial

5pin.jpg


Ft232.jpg


  • USB2UART_GND ------> SmartNode_GPIO0
  • USB2UAR_GND -----> SmartNode_GND
  • USB2UAR_RXD -----> SmartNode_TX
  • USB2UAR_TXD -----> SmartNode_RX


Connect USB2UAR_VCC3.3 -----> SmartNode_VCC at last

ESP8285 will be enter upload mode, we can upload the compiled firmware through serial using following commands in Linux:

$ cd /path/to/noduino-sdk/sketch/open-onoff
$ make produce ESPPORT=/dev/ttyUSB1


In windows:

$ make produce ESPPORT=COM7

COM7 is your USB2UART device


In MAC OS, maybe it's:

$ make produce ESPPORT=/dev/cu.SLAB_USBtoUART

/dev/cu.SLAB_USBtoUART is your USB2UART device



5.2.2 Online

Access
http://dev.noduino.org/openonoff


Login
  • Username: noduino
  • password: noduino1234


Click the "Add files", select the user1.bin and user2.bin located in /path/to/noduino-sdk/sketch/open-onoff/build/


Then click "Start upload" to upload the user1.bin and user2.bin into the server temporaily


Enter Official Account, then click "Add" menu, enter "Debug" page

Maike-upload-online-1.jpg


Select your device and the input "ota" in the data aera then click "send data"


Maike-upload-online-2.jpg


Device will download your user1.bin or user2.bin and write it into flash when the device received the "ota" message

You will see the device online message in the Debug page when the uploading is finished




6 Hardware

OpenOnoff-V1.0-sch.png


OpenOnoff-V1.0-layout.png




7 Reference

For more information please refer to





























个人工具
名字空间

变换
操作
导航
工具箱