Noduino OpenOnoff
来自Jack's Lab
（版本间的差异）
(→Hacking) |
(→Serial) |
||
| 第64行： | 第64行： | ||
| − | * | + | * USB2UART_GND ------> SmartNode_GPIO0 |
| − | * | + | * USB2UAR_GND -----> SmartNode_GND |
| − | * | + | * USB2UAR_RXD -----> SmartNode_TX |
| − | * | + | * USB2UAR_TXD -----> SmartNode_RX |
| − | Connect | + | Connect USB2UAR_VCC3.3 -----> SmartNode_VCC at last |
ESP8285 will be enter upload mode, we can upload the compiled firmware through serial using following commands: | ESP8285 will be enter upload mode, we can upload the compiled firmware through serial using following commands: | ||
2016年10月25日 (二) 00:49的版本
目录 |
1 Overview
- AC 85V - 250V General Power Switch
- ESP8285 inside
- 250V 10A relay
- Mainboard size 53mm x 28mm x 17.8mm(H)
- Shell size 63mm x 33mm x 21mm(H)
2 Quick Start
3 Open API
4 Hacking
4.1 Prepare firmware
Get noduino-sdk：
$ git clone --recursive git://github.com/icamgo/noduino-sdk.git noduino-sdk
Generate toolchain (you need Python 2.7)：
$ cd noduino-sdk/toolchain $ ./gen.py
Compile the firmware：
$ cd ../sketch/open-onoff $ make
4.2 Upload
4.2.1 Serial
- USB2UART_GND ------> SmartNode_GPIO0
- USB2UAR_GND -----> SmartNode_GND
- USB2UAR_RXD -----> SmartNode_TX
- USB2UAR_TXD -----> SmartNode_RX
Connect USB2UAR_VCC3.3 -----> SmartNode_VCC at last
ESP8285 will be enter upload mode, we can upload the compiled firmware through serial using following commands:
$ cd /path/to/noduino-sdk/sketch/open-onoff $ make produce ESPPORT=/dev/ttyUSB1
4.2.2 Online
5 Hardware
]
