查看Noduino OpenPlug的源代码
←
Noduino OpenPlug
跳转到:
导航
,
搜索
因为以下原因,你没有权限编辑本页:
您刚才请求的操作只有这个用户组中的用户才能使用:
用户
您可以查看并复制此页面的源代码:
== Overview == * AC 85V - 250V Smart Plug * ESP8285 inside * 250V 10A relay * Shell size 53mm x 53mm x 27mm [[文件:Open-plug-board-shell.jpg | 600px]] [[文件:Open-plug-board.jpg | 600px]] <br><br> == Quick Start == [[文件:Maike-wifi-ctrl-2233-all-en.jpg]] * Power on the plug, waiting for network connection with indicator light flash slowly for 6sec. * If there is no flash, please press the button for 10sec. * Mobile connect to 2.4G WiFi, scan the QR code in WeChat and click "Network Connection". * Enter WiFi password and click "connect" then waiting for network connection. (P.S. only 2.4G WiFi is applicable, 5G WiFi and Enterprise - level security certifications are not supportable.) * Finish WiFi configuration, WeChat will be in LAN devices matching mode with devices list visible. * Click the first device then press "Device Binding" button to bind the device. (P.S. if the device has been binding, then the button at bottom is "Enter Official Account" * Finish above steps, please press "Enter Official Account" button then click "smart device" button to find your binding devices list. Click the device to enter control page. If more people need to control the device, please connect to the same router and scan the same QR code while the device is power on. Click "Device connected and skip" -> "Link Device"->"Enter Official Account" to control smart devices ;;Note: * Press the button momentarily, manual switch controller * Press the button for 10sec, restore the factory settings. <br><br> == Open API == <br><br> == Hacking == === Prepare firmware === Get noduino-sdk: <source lang=bash> $ git clone --recursive git://github.com/icamgo/noduino-sdk.git noduino-sdk </source> Generate toolchain (you need Python 2.7): <source lang=bash> $ cd noduino-sdk/toolchain $ ./gen.py </source> Compile Open Plug firmware: <source lang=bash> $ cd ../sketch/open-plug $ make </source> The generated firmware is located in build/ dir named user1.bin annnd user2.bin Window environment please refer to [[Getting Started with Noduino SDK on Windows]], you can get how to setup the basic developmennt environment <br><br> === Upload === ==== Serial ==== [[文件:5pin.jpg]] [[文件:Ft232.jpg | 800px]] * USB2UART_GND ------> SmartNode_GPIO0 * USB2UAR_GND -----> SmartNode_GND * USB2UAR_RXD -----> SmartNode_TX * USB2UAR_TXD -----> SmartNode_RX Connect USB2UAR_VCC3.3 -----> SmartNode_VCC at last ESP8285 will be enter upload mode, we can upload the compiled firmware through serial using following commands in Linux: <source lang=bash> $ cd /path/to/noduino-sdk/sketch/open-plug $ make produce ESPPORT=/dev/ttyUSB1 </source> In windows: <source lang=bash> $ make produce ESPPORT=COM7 </source> COM7 is your USB2UART device In MAC OS, maybe it's: <source lang=bash> $ make produce ESPPORT=/dev/cu.SLAB_USBtoUART </source> /dev/cu.SLAB_USBtoUART is your USB2UART device <br><br> ==== Online ==== ;; Access: http://dev.noduino.org/openonoff ;; Login: * Username: noduino * password: noduino1234 Click the "Add files", select the user1.bin and user2.bin located in /path/to/noduino-sdk/sketch/open-plug/build/ Then click "Start upload" to upload the user1.bin and user2.bin into the server temporaily <br><br> == Hardware == [[文件:Open-plug-v0.8-sch.png | 900px]] [[文件:Open-plug-layout.png | 600px]] <br><br> <br><br> <br><br> <br><br> <br><br> <br><br> <br><br> <br><br> <br><br> <br><br> <br><br> <br><br> <br><br> <br><br>
返回到
Noduino OpenPlug
。
个人工具
登录
名字空间
页面
讨论
变换
查看
阅读
查看源代码
查看历史
操作
搜索
导航
首页
社区专页
新闻动态
最近更改
随机页面
帮助
工具箱
链入页面
相关更改
特殊页面