2016年10月27日 (四) 11:02的版本

1 Overview

• AC 85V - 250V Smart Plug
• ESP8285 inside
• 250V 10A relay
• Shell size 53mm x 53mm x 27mm

2 Quick Start

• Power on the plug, waiting 8s

• Light is flashing slowly means waiting for network matching

• If there is no flash, please press the button for 10sec.

• Mobile connect to 2.4G WiFi, scan the QR code in WeChat and click "Network Connection"

• Enter WiFi password and click "Connect" then waiting for network connection. (P.S. only 2.4G WiFi is applicable, 5G WiFi and Enterprise - level security certifications are not supportable.)

• Finish WiFi configuration, WeChat will be in LAN devices discovery mode with devices list visible.

• Click the first device then press "Like Device" button to bind the device. (P.S. if the device has been binding, then the button at bottom is "Enter Official Account")

• Finish above steps, please press "Enter Official Account" button then click "My Device" button to find your binding devices list. Click the device to enter control page.

If more people need to control the device, please connect to the same router and scan the same QR code while the device is power on. Click "Device connected and skip" -> "Link Device"->"Enter Official Account" to control smart devices

Note

• Press the button momentarily, manual switch controller

• Press the button for 10sec, restore the factory settings.

3 Open API

4 Hacking

4.1 Prepare firmware

Get noduino-sdk：

$ git clone --recursive git://github.com/icamgo/noduino-sdk.git noduino-sdk

Generate toolchain (you need Python 2.7)：

$ cd noduino-sdk/toolchain
$ ./gen.py

Compile Open Plug firmware：

$ cd ../sketch/open-plug
$ make

The generated firmware is located in build/ dir named user1.bin annnd user2.bin

Window environment please refer to Getting Started with Noduino SDK on Windows, you can get how to setup the basic developmennt environment

4.2 Upload

4.2.1 Serial

• USB2UART_GND ------> SmartNode_GPIO0
• USB2UAR_GND -----> SmartNode_GND
• USB2UAR_RXD -----> SmartNode_TX
• USB2UAR_TXD -----> SmartNode_RX

Connect USB2UAR_VCC3.3 -----> SmartNode_VCC at last

ESP8285 will be enter upload mode, we can upload the compiled firmware through serial using following commands in Linux:

$ cd /path/to/noduino-sdk/sketch/open-plug
$ make produce ESPPORT=/dev/ttyUSB1

In windows:

$ make produce ESPPORT=COM7

COM7 is your USB2UART device

In MAC OS, maybe it's:

$ make produce ESPPORT=/dev/cu.SLAB_USBtoUART

/dev/cu.SLAB_USBtoUART is your USB2UART device

4.2.2 Online

Access

http://dev.noduino.org/openonoff

Login

• Username: noduino
• password: noduino1234

Click the "Add files", select the user1.bin and user2.bin located in /path/to/noduino-sdk/sketch/open-plug/build/

Then click "Start upload" to upload the user1.bin and user2.bin into the server temporaily

5 Hardware

6 Reference

For more information please refer to

• Noduino