查看Noduino SmartNode的源代码
←
Noduino SmartNode
跳转到:
导航
,
搜索
因为以下原因,你没有权限编辑本页:
您刚才请求的操作只有这个用户组中的用户才能使用:
用户
您可以查看并复制此页面的源代码:
== Quick Start == Link 3.3V power supply (600mA output) to VCC&GND that is on the back of model; [[文件:Nodec-2.jpg | 600px]] Power on, the model will auto detect Wifi. If there is no available router can be detected, the model will be waiting for network connection. Please follow below indication to connect WiFi. === Setup WiFi === Make sure that your phone is connected to your WiFi router. Scan the QR code in WeChat [[文件:Maike-wifi-ctrl-2233-all-en.jpg]] Coming to below page: [[文件:MK-Noduino-MJYUN-NFF-1.jpg | 450px]] Click "Connecting Network" button: [[文件:MK-Noduino-MJYUN-NFF-2.jpg | 450px]] Enter WiFi password then click "Connect" to complete WiFi connection. (NOTE, this network connection model only apply to 2.4G router, unapplicable for neither 5G router nor Enterprise level security certification. <br><br> === Link Device === Complete WiFi connection, WeChat will auto detect linkable devices in current routed environment and list them: [[文件:MK-Noduino-MJYUN-NFF-3.jpg | 450px]] 1st device, last 4 letters is the MAC address that can corresponds to the serial port output Click the 1st device then click the "Link Device" on the bottom of next page. (Note, if this device has been linked, button at the bottom will be "Enter Official Account" <br><br> === List device === Following above steps, please click "Enter Official Account" button, all your linked devices will be listed in the menu "Smart Devices" (The second button on the bottom of the page) [[文件:MK-Noduino-iBaihe-NFF-4.jpg | 450px]] <br><br> === Control Device === The default device name of this quick example is Noduino Ctrl5Relay". Click "Noduino Ctrl5Relay" in the device list page then coming to the control page: [[文件:MK-Noduino-iBaihe-NFF-5.jpg | 450px]] Correspondence of Relay and model pins: <pre> 1. GPIO13(D4) control the 1st relay 2. GPIO12(D5) control the 2nd relay (pull up) 3. GPIO14(D6) control the 3rd relay 4. GPIO16(D7) control the 4th relay 5. GPIO4 (D8) control the 5th relay </pre> Turn On/Off Relay in WeChat UI page. Corresponding GPIO will be increase or reduce physically. <br><br>
返回到
Noduino SmartNode
。
个人工具
登录
名字空间
页面
讨论
变换
查看
阅读
查看源代码
查看历史
操作
搜索
导航
首页
社区专页
新闻动态
最近更改
随机页面
帮助
工具箱
链入页面
相关更改
特殊页面