查看Noduino SmartNode CN的源代码
←
Noduino SmartNode CN
跳转到:
导航
,
搜索
因为以下原因,你没有权限编辑本页:
您刚才请求的操作只有这个用户组中的用户才能使用:
用户
您可以查看并复制此页面的源代码:
== 管脚接口 == <font color=red><b>注意:模块只能 3.3V 供电,5V 供电会烧毁芯片,切记切记!</b></font> 正面: GPIO12 GPIO13 GPIO14 GPIO4 GPIO5 GPIO15 背面: GPIO16 GPIO0 GND TX RX VCC 默认烧写的固件为 5 路继电器控制固件,使用的 GPIO 资源为: <pre> 1. GPIO13(D4) control the 1st relay 2. GPIO12(D5) control the 2nd relay (pull up) 3. GPIO14(D6) control the 3rd relay 4. GPIO16(D7) control the 4th relay 5. GPIO4 (D8) control the 5th relay </pre> 6 路继电器控制固件,第 6 路为: GPIO5 (D9) control the 6th relay 应用如需外接 I2C 口的传感器、OLED 屏等,可将 GPIO4 (D8) 和 GPIO5 (D9) 作为 I2C 之 SCL 和 SDA,参考示例: * [[Noduino SHT2x]] SHT2X Digital Humidity & Temperature Sensor * [[Noduino TSL2561]] TSL2561 Digital Luminosity/Lux/Light Sensor * [[Noduino BMP180]] BMP180 Barometric Pressure/Altitude Sensor * [[Noduino BMP085]] BMP085 Barometric Pressure/Temperature/Altitude Sensor * [[Noduino BH1750]] BH1750 Digital Light Sensor * [[Noduino PCF8563]] PCF8563 I2C RTC Chip * [[Noduino OLED]] SSD1306 I2C OLED Screen support * [[Noduino I2C Scan]] Scan all the I2C devices 这样即便 GPIO4 和 GPIO5 用作 I2C,依然有 GPIO12, GPIO13, GPIO14, GPIO15, GPIO16, GPIO0 用作继电器控制 <br><br>
返回到
Noduino SmartNode CN
。
个人工具
18.188.228.210
该IP地址的讨论
登录
名字空间
页面
讨论
变换
查看
阅读
查看源代码
查看历史
操作
搜索
导航
首页
社区专页
新闻动态
最近更改
随机页面
帮助
工具箱
链入页面
相关更改
特殊页面