RS485
来自Jack's Lab
(版本间的差异)
(→ISL3152E) |
(→ISL3152E) |
||
第33行: | 第33行: | ||
=== ISL3152E === | === ISL3152E === | ||
− | < | + | <source lang=bashc> |
• High driver VOD. . . . . . . 2.4V (Min) at RD = 54Ω | • High driver VOD. . . . . . . 2.4V (Min) at RD = 54Ω | ||
Better noise immunity, or drive up to eight | Better noise immunity, or drive up to eight | ||
第47行: | 第47行: | ||
• Low quiescent supply current . . . . . . . . . . 600µA | • Low quiescent supply current . . . . . . . . . . 600µA | ||
• Ultra low shutdown supply current . . . . . . . . 70nA | • Ultra low shutdown supply current . . . . . . . . 70nA | ||
− | </ | + | </source> |
2017年9月16日 (六) 13:51的版本
目录 |
1 Overview
RS-485 在多数情况下,由于应用环境的恶劣,需采用隔离方案以防止出现接地环路。
光耦隔离电路占用空间大,需要分立元件、缓存驱动, 但成本便宜
ADI 的 iCoupler 磁隔离解决方案,它能够提供多通道数字隔离、集成 RS-485 收发器的数字隔离、集成 isoPower 磁隔离电源的数字隔离等多种灵活的隔离方案。在体积、功耗、速率等众多方面优于光耦的解决方案
2 Hardware
2.1 MAX485
Need B0505 DC-DC and PS2501
- RS485_1_A+ --- MAX485_PIN6
- RS485_1_B- --- MAX485_PIN7
- MAX485_PIN4 --- ARM9_CORE_J2_68_TXD0
- MAX485_PIN1 --- ARM9_CORE_J2_69_RXD0
- MAX485_PIN2 & 3 --- ARM9_CORE_J1_69_PC30
2.2 ISL3152E
• High driver VOD. . . . . . . 2.4V (Min) at RD = 54Ω Better noise immunity, or drive up to eight terminations • ±16.5kV IEC61000 ESD protection on I/O bus pins • High transient overvoltage tolerance . . . . . ±100V • Full fail-safe (open, short, terminated) receivers • High Rx IOL for opto-couplers in isolated designs • Hot plug circuitry - Tx and Rx outputs remain three-state during power-up and power-down • True 1/8 unit load for up to 256 devices on the bus • High data rates . . . . . . . . . . . . . . . up to 20Mbps • Low quiescent supply current . . . . . . . . . . 600µA • Ultra low shutdown supply current . . . . . . . . 70nA
- http://www.intersil.com/content/dam/Intersil/documents/isl3/isl3150e-52e-53e-55e-56e-58e.pdf
- http://www.intersil.com/content/dam/Intersil/whitepapers/interface/rs-485-transceiver-tutorial_cn.pdf
- http://www.intersil.com/content/dam/Intersil/documents/an19/an1986.pdf
2.3 ADM2483
Also need the B0505 DC-DC
2.4 ISO3082
Also need the B0505 DC-DC
2.5 ADM2587
ADM2582E/ADM2587E 以单芯片实现完全的半/全双工RS-485接口隔离。ADM2582E/ADM2587E 集成 isoPower 磁隔离电源,无需外部隔离电源供电。还集成了数字隔离通道和 RS-485 收发器,具备±15 kV ESD 保护功能,适用于多点传输线路上的高速通信应用。
其内部集成的 RS-485 驱动器带有一个高电平有效使能电路,并且还提供一个高电平接收机有效禁用电路,可使接收机输出进入高阻抗状态。该器件具备限流和过热关断特性,能够防止输出短路,并防止出现由于总线争用而引起功耗过大的情况。
芯片封装为 SOIC-20
全双工RS-485/RS-422:
半双工RS-485/RS-422:
3 Reference