STM8
来自Jack's Lab
（版本间的差异）
(→Upload) |
(→Software) |
||
| 第76行： | 第76行： | ||
<br> | <br> | ||
| + | |||
| + | === Connections === | ||
| + | |||
| + | * The RST is connected to ESP8266 GPIO5 (D1 on NodeMCU). | ||
| + | * The SWIM is connected to ESP8266 GPIO4 (D2 on NodeMCU) via a 1kΩ pull-up resistor | ||
| + | * 3.3V --- VCC_3.3V | ||
| + | * GND --- GND | ||
<br> | <br> | ||
2018年11月13日 (二) 10:16的版本
目录 |
1 STM8S105K6
- 16 MHz advanced STM8 core
- 32 Kbyte Flash
- 1 Kbyte EEPROM
- 2 Kbyte RAM
- 10-bit, ±1 LSB ADC with up to 10 multiplexed channels ADC
- UART with clock output for SmartCard, IrDA, LIN master mode
- SPI interface up to 8 Mbit/s
- I2C interface up to 400 kbit/s
- Up to 38 I/Os on a 48-pin package
- 96-bit unique key for each device
- 2.95 to 5.5 V operating voltage
2 Toolchain
2.1 STM8Tools
- https://github.com/tenbaht/sduino/releases/download/v0.3.3/sduino-tools_linux32-2017.11.13.tar.bz2
- https://github.com/tenbaht/sduino/releases/download/v0.3.3/sduino-tools_linux64-2017.11.13.tar.bz2
- https://github.com/tenbaht/sduino/releases/download/v0.3.3/sduino-tools_macosx-2017.11.13.tar.bz2
- https://github.com/tenbaht/sduino/releases/download/v0.3.3/sduino-tools_mingw32-2017.11.13.tar.bz2
2.2 SDCC
- https://github.com/tenbaht/sduino/releases/download/v0.3.0/sdcc-stm8-amd64-unknown-linux2.5-20171020-10088.tar.bz2
- https://github.com/tenbaht/sduino/releases/download/v0.3.0/sdcc-stm8-i386-unknown-linux2.5-20171020-10088.tar.bz2
- https://github.com/tenbaht/sduino/releases/download/v0.3.0/sdcc-stm8-i586-mingw32msvc-20171020-10088.tar.bz2
- https://github.com/tenbaht/sduino/releases/download/v0.3.3/sdcc-stm8-universal-apple-macosx-20170720-9960.tar.bz2
2.3 i686-mingw32
- https://github.com/stm32duino/BoardManagerFiles/raw/master/STM8/tools/STM8Tools-0.1.0-windows.tar.bz2
- http://cosmicsoftware.com/Arduino/4.1.3/Cxppstm8.zip
2.4 Github
- https://github.com/tenbaht/sduino
- https://github.com/tenbaht/sduino/raw/master/package_sduino_stm8_index.json
- https://github.com/stm32duino/Arduino_Core_STM8
- https://github.com/stm32duino/BoardManagerFiles/raw/master/STM8/package_stm8_index.json
3 Upload
The STM8 SWIM protocol (STLink) is well documented in UM0470
3.1 Hardware
3.2 Software
3.3 Connections
- The RST is connected to ESP8266 GPIO5 (D1 on NodeMCU).
- The SWIM is connected to ESP8266 GPIO4 (D2 on NodeMCU) via a 1kΩ pull-up resistor
- 3.3V --- VCC_3.3V
- GND --- GND
4 Debug
5 Reference
