官方系统启动日志

来自Jack's Lab
跳转到: 导航, 搜索

小米路由官方系统启动日志

通过串口获得


initing...
service is stopped.
==========device=wl0========
...wl0.type=broadcom...
run1 eval type disable_broadcom
run2 eval disable_broadcom 'wl0'
disable wl0
br-lan: port 2(wl0) entering forwarding state
==========device=wl1========
...wl1.type=broadcom...
run1 eval type disable_broadcom
run2 eval disable_broadcom 'wl1'
disable wl1
br-lan: port 3(wl1) entering forwarding state
br-lan: port 1(eth0.1) entering forwarding state
device eth0.1 left promiscuous mode
device eth0 left promiscuous mode
br-lan: port 1(eth0.1) entering disabled state
device wl1 left promiscuous mode
br-lan: port 3(wl1) entering disabled state
device wl0 left promiscuous mode
br-lan: port 2(wl0) entering disabled state
/etc/rc.common: /etc/init.d/rule_mgr: line 6: can't create /dev/null: Read-only file system
/etc/rc.common: /etc/init.d/rule_mgr: line 7: can't create /dev/null: Read-only file system
mkdir: can't create directory '/tmp/daemon/': Read-only file system
/usr/sbin/supervisord: /lib/lib.scripthelper.sh: line 2227: can't create /dev/kmsg: Read-only file system
/usr/sbin/supervisord: /lib/lib.scripthelper.sh: line 2227: can't create /proc/21662/fd/2: nonexistent directory
mkdir: can't create directory '/tmp/daemon/': Read-only file system
Sent SIGTERM to all processesib.scripthelper.sh: line 2227: can't create /de
Sent SIGKILL to all processes
Requesting system reboot
sd 0:0:0:0: [sda] Synchronizing SCSI cache
Restarting system.
Digital core power voltage set to 1.0V
Decompressing...done
Digital core power voltage set to 1.0V
Decompressing...done
Found a ST compatible (Marconix) serial flash with 256 64KB blocks; total size 16MB


CFE version v1.0.4
BSP: 6.37.14.34 (r415984) based on BBP 1.0.37 for BCM947XX (32bit,SP,)
Build Date: Wed Apr 30 18:03:21 CST 2014 (szy@shenzhiyong-ct)
Copyright (C) 2000-2008 Broadcom Corporation.

Init Arena
Init Devs.
Boot up from NOR flash...
Boot partition size = 262144(0x40000)
Can't find nandflash! ccrev = 42, chipst= 0
DDR Clock: 800 MHz
Info: DDR frequency set from clkfreq=1000,*800*
et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 6.37.14.34 (r415984)
CPU type 0x0: 1000MHz
Tot mem: 262144 KBytes

CFE mem:    0x00F00000 - 0x0179FE38 (9043512)
Data:       0x00F58390 - 0x00F588C8 (1336)
BSS:        0x00F588D8 - 0x00F9DE38 (284000)
Heap:       0x00F9DE38 - 0x0179DE38 (8388608)
Stack:      0x0179DE38 - 0x0179FE38 (8192)
Text:       0x00F00000 - 0x00F4CCC4 (314564)
Boot:       0x017A0000 - 0x017E0000
Reloc:      I:00000000 - D:00000000

Device eth0:  hwaddr 8C-BE-BE-20-B7-48, ipaddr 192.168.1.1, mask 255.255.255.0
        gateway not set, nameserver not set
bootargs: boot -raw -z -addr=0x8000 -max=0xef8000 flash0.os:
Loader:raw Filesys:raw Dev:flash0.os File: Options:(null)
Loading: ..... 5372256 bytes read
Entry at 0x00008000
Closing network.
Starting program at 0x00008000
console [ttyS0] enabled, bootconsole disabled
serial8250.0: ttyS1 at MMIO 0x18000400 (irq = 117) is a 16550
init reset module!
brd: module loaded
loop: module loaded
ahci 0003:03:00.0: version 3.0
PCI: Enabling device 0003:03:00.0 (0140 -> 0142)
ahci: SSS flag set, parallel bus scan disabled
ahci 0003:03:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0003:03:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
scsi0 : ahci
scsi1 : ahci
ata1: FORCE: PHY spd limit set to 3.0Gbps
ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 175
ata2: FORCE: PHY spd limit set to 3.0Gbps
ata2: SATA max UDMA/133 abar m512@0x48000000 port 0x48000180 irq 175
bcmsflash: squash filesystem found at block 127
Creating 10 MTD partitions on "bcmsflash":
0x000000000000-0x000000040000 : "boot"
0x000000040000-0x000000340000 : "os"
0x000000340000-0x000000640000 : "os1"
0x000000640000-0x000000ed0000 : "squashfs"
0x000000ed0000-0x000000ee0000 : "crash"
0x000000ee0000-0x000000fe0000 : "overlay"
0x000000fe0000-0x000000ff0000 : "board_data"
0x000000ff0000-0x000001000000 : "nvram"
0x000000000000-0x000000fe0000 : "firmware"
0x0000007fe4b4-0x000000d8b000 : "os2"
PPP generic driver version 2.4.2
NET: Registered protocol family 24
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:0b.1: EHCI Host Controller
ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:0b.1: irq 111, io mem 0x18021000
ehci_hcd 0000:00:0b.1: USB 0.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd 0000:00:0b.0: OHCI Host Controller
ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:0b.0: irq 111, io mem 0x18022000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usbcore: registered new interface driver usbserial
usbserial: USB Serial Driver core
USB Serial support registered for pl2303
usbcore: registered new interface driver pl2303
pl2303: Prolific PL2303 USB to serial adaptor driver
Bluetooth: Virtual HCI driver ver 1.3
Bluetooth: HCI UART driver ver 2.2
Bluetooth: HCI H4 protocol initialized
Bluetooth: HCI BCSP protocol initialized
Bluetooth: HCILL protocol initialized
Bluetooth: HCIATH3K protocol initialized
Bluetooth: Broadcom Blutonium firmware driver ver 1.2
usbcore: registered new interface driver bcm203x
Bluetooth: Digianswer Bluetooth USB driver ver 0.10
usbcore: registered new interface driver bpa10x
Bluetooth: BlueFRITZ! USB driver ver 1.2
usbcore: registered new interface driver bfusb
Bluetooth: Generic Bluetooth USB driver ver 0.6
usbcore: registered new interface driver btusb
Bluetooth: Atheros AR30xx firmware driver ver 1.0
usbcore: registered new interface driver ath3k
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (3973 buckets, 15892 max)
ctnetlink v0.93: registering with nfnetlink.
TCP cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Bluetooth: L2CAP ver 2.15
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO (Voice Link) ver 0.6
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
L2TP core driver, V2.0
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320)
ata1.00: ATA-8: WDC WD1600BEKT-00PVMT0, 01.01A01, max UDMA/133
ata1.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      WDC WD1600BEKT-0 01.0 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
ata2: SATA link down (SStatus 0 SControl 320)
Freeing init memory: 1180K
Loading essential drivers...
Check for USB rescure...
Press Ctrl+C to enter RAMFS...
Bringup the system...
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
mount: mounting none on /proc failed: Device or resource busy
mount: mounting sysfs on /sys failed: Device or resource busy
- preinit -
- regular preinit -
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
- init -
init started: BusyBox v1.19.4 (2014-05-22 22:39:33 CST)

Please press Enter to activate this console. rcS S boot: INFO: rc script run time limit to 65 seconds.
init.d/fstab[693]: Cannot find device "br-lan"
Thu Jan  1 00:00:06 UTC 1970 pre-system-up[891]:  *
Thu Jan  1 00:00:06 UTC 1970 pre-system-up[891]:  ******* armv7l *******
Thu Jan  1 00:00:06 UTC 1970 pre-system-up[891]: INFO: device already initialed, web initial redirect disabled.
Thu Jan  1 00:00:06 UTC 1970 pre-system-up[891]:  ******* NORMAL BOOT *******
Thu May 22 16:53:00 UTC 2014 init.d/boot[982]: INFO: nvram get vlan1ports: 0 2 5*
Thu May 22 16:53:00 UTC 2014 init.d/boot[982]: INFO: nvram get vlan2ports: 4 5
NTFS driver 2.1.29 [Flags: R/W MODULE].
fuse init (API version 7.15)
PPP MPPE Compression module registered
GRE over IPv4 demultiplexor driver
PPTP driver version 0.8.5
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
ctf: module license 'Proprietary' taints kernel.
Disabling lock debugging due to kernel taint
et_module_init: passivemode set to 0x0
et_module_init: txworkq set to 0x0
et_module_init: et_txq_thresh set to 0x400
eth0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 6.37.14.34 (r415984)
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbmon: debugfs is not available
Mirror/redirect action on
u32 classifier
    Actions configured
NF_TPROXY: Transparent proxy support initialized, version 4.1.0
NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
ip_set: protocol 6
xt_time: kernel timezone is -0000
ip_tables: (C) 2000-2006 Netfilter Core Team
GRE over IPv4 tunneling driver
ip6_tables: (C) 2000-2006 Netfilter Core Team
IPv6 over IPv4 tunneling driver
PPPoL2TP kernel driver, V2.0
wl_module_init: passivemode set to 0x0
wl_module_init: txworkq set to 0x0
Neither SPROM nor OTP has valid image
srom rev:0
wl0: Broadcom BCM4360 802.11 Wireless Controller 6.37.14.34 (r415984 WLTEST)
PCI: Enabling device 0002:02:00.0 (0140 -> 0142)
Neither SPROM nor OTP has valid image
srom rev:0
wl1: Broadcom BCMa8db 802.11 Wireless Controller 6.37.14.34 (r415984 WLTEST)
Adding 262140k swap on /userdisk/.swapfiles.  Priority:-1 extents:2 across:270332k
Fri May 23 00:53:02 CST 2014 netconfig[1339]: INFO: loading exist /etc/config/network.
Fri May 23 00:53:02 CST 2014 netconfig[1339]: config switch 'eth0'
Fri May 23 00:53:02 CST 2014 netconfig[1339]: option enable '1'
Fri May 23 00:53:02 CST 2014 netconfig[1339]: config switch_vlan 'eth0_1'
Fri May 23 00:53:02 CST 2014 netconfig[1339]: option device 'eth0'
Fri May 23 00:53:02 CST 2014 netconfig[1339]: option vlan '1'
Fri May 23 00:53:02 CST 2014 netconfig[1339]: option ports '0 2 5*'
Fri May 23 00:53:02 CST 2014 netconfig[1339]: config switch_vlan 'eth0_2'
Fri May 23 00:53:02 CST 2014 netconfig[1339]: option device 'eth0'
Fri May 23 00:53:02 CST 2014 netconfig[1339]: option vlan '2'
Fri May 23 00:53:02 CST 2014 netconfig[1339]: option ports '4 5'
Fri May 23 00:53:02 CST 2014 netconfig[1339]: config interface 'loopback'
Fri May 23 00:53:02 CST 2014 netconfig[1339]: option ifname 'lo'
Fri May 23 00:53:02 CST 2014 netconfig[1339]: option proto 'static'
Fri May 23 00:53:02 CST 2014 netconfig[1339]: option ipaddr '127.0.0.1'
Fri May 23 00:53:02 CST 2014 netconfig[1339]: option netmask '255.0.0.0'
Fri May 23 00:53:02 CST 2014 netconfig[1339]: config interface 'lan'
Fri May 23 00:53:02 CST 2014 netconfig[1339]: option type 'bridge'
Fri May 23 00:53:02 CST 2014 netconfig[1339]: option ifname 'eth0.1'
Fri May 23 00:53:02 CST 2014 netconfig[1339]: option proto 'static'
Fri May 23 00:53:02 CST 2014 netconfig[1339]: option ipaddr '192.168.31.1'
Fri May 23 00:53:02 CST 2014 netconfig[1339]: option netmask '255.255.255.0'
Fri May 23 00:53:02 CST 2014 netconfig[1339]: config interface 'wan'
Fri May 23 00:53:02 CST 2014 netconfig[1339]: option proto 'dhcp'
Fri May 23 00:53:02 CST 2014 netconfig[1339]: option mtu '1480'
Fri May 23 00:53:02 CST 2014 netconfig[1339]: option ifname 'eth0.2'
device eth0.1 entered promiscuous mode
device eth0 entered promiscuous mode
br-lan: port 1(eth0.1) entering learning state
br-lan: port 1(eth0.1) entering learning state
device wl0 entered promiscuous mode
br-lan: port 2(wl0) entering learning state
br-lan: port 2(wl0) entering learning state
device wl1 entered promiscuous mode
br-lan: port 3(wl1) entering learning state
br-lan: port 3(wl1) entering learning state
br-lan: port 1(eth0.1) entering forwarding state
br-lan: port 2(wl0) entering forwarding state
br-lan: port 3(wl1) entering forwarding state
rcS S boot: INFO: rcS S boot timing 31 seconds.
Fri May 23 00:53:30 CST 2014 INFO: rcS S boot timing 31 seconds.
rcS S boot: system type(R1D/1): SATA/0
Fri May 23 00:53:30 CST 2014 system type(R1D/1): SATA/0
rcS S boot: ROOTFS: /dev/sda1 on / type ext4 (ro,relatime,barrier=1,data=ordered)
Fri May 23 00:53:30 CST 2014 ROOTFS: /dev/sda1 on / type ext4 (ro,relatime,barrier=1,data=ordered)
Fri May 23 00:53:30 CST 2014 boot_check[12286]: INFO: Wireless OK

















个人工具
名字空间

变换
操作
导航
工具箱