查看迷你看门狗的源代码
←
迷你看门狗
跳转到:
导航
,
搜索
因为以下原因,你没有权限编辑本页:
您刚才请求的操作只有这个用户组中的用户才能使用:
用户
您可以查看并复制此页面的源代码:
== 主控SoC == === 概述 === ;; Tensilica Xtensa LX3 32-bit RISC SOC clocked at 80 MHz [[文件:Tensilica-xtensalx3.jpg]] * 32-bit ALU * 16, 32 or 64 GPR * six special purpose registers * 80 base instructions The Xtensa ISA employs 24-bit instructions with 16-bit narrow encodings for the most common instructions. <br><br> === 管脚定义 === [[文件:Esp8266ex-layout.jpg | 360px]] * PIN8 --- GPIO16 / Deep-Sleep Wakeup * PIN9 --- GPIO14 / HSPICLK * PIN10 --- GPIO12 / HSPIQ * PIN12 --- GPIO13 / HSPID * PIN13 --- GPIO15 / HSPICS * PIN14 --- GPIO2 / UART TX during flash programming * PIN15 --- GPIO0 / SPICS2 * PIN16 --- GPIO4 * PIN24 --- GPIO5 * PIN25 --- GPIO3 / UART RX during flash programming / URXD * PIN26 --- GPIO1 / SPICS1 / UTXD <br><br> === UART === ;;UART0: <pre> U0TXD --- PIN26 U0RXD --- PIN25 U0CTS --- PIN12 (MTCK) U0RTS --- PIN13 (MTDO) </pre> After calling void system_uart_swap(): <pre> U0TXD --- PIN13 (MTDO) ---> Output pin, NOT be pulled up externally in the initiallization stage U0RXD --- PIN12 (MTCK) U0CTS --- PIN25 U0RTS --- PIN26 </pre> ;;UART1: -- Only ouput pin, used for printing of debug information U1TXD --- PIN14 (GPIO2) <br><br> === Toolchain === * https://github.com/jcmvbkbc/gcc-xtensa <br><br>
返回到
迷你看门狗
。
个人工具
登录
名字空间
页面
讨论
变换
查看
阅读
查看源代码
查看历史
操作
搜索
导航
首页
社区专页
新闻动态
最近更改
随机页面
帮助
工具箱
链入页面
相关更改
特殊页面