ESP32 Partical

来自Jack's Lab
（版本间的差异）
跳转到： 导航, 搜索
(→‎Overview)
(→‎Code Example)
 
（未显示1个用户的15个中间版本）
第7行： 第7行：
 
<br><br>
 
<br><br>
  
−
== PIN ==
+
== Connections ==
  
 
[[文件:Sharp.gy1010.pin.jpg]]
 
[[文件:Sharp.gy1010.pin.jpg]]
第14行： 第14行：
 
Sharp pin 1 (V-LED)  => 150ohm resister => Quantum_VIN_3V3
 
Sharp pin 1 (V-LED)  => 150ohm resister => Quantum_VIN_3V3
 
Sharp pin 2 (LED-GND) => Quantum_GND
 
Sharp pin 2 (LED-GND) => Quantum_GND
−
Sharp pin 3 (LED)    => Quantum_D7_IO27
+
Sharp pin 3 (LED)    => Quantum_D8_IO22
 
Sharp pin 4 (S-GND)  => Quantum_GND
 
Sharp pin 4 (S-GND)  => Quantum_GND
−
Sharp pin 5 (Vo)      => Quantum_I36
+
Sharp pin 5 (Vo)      => Quantum_IO35
 
Sharp pin 6 (Vcc)    => Quantum_VIN_3V3
 
Sharp pin 6 (Vcc)    => Quantum_VIN_3V3
 
</pre>
 
</pre>
第25行： 第25行：
  
 
[[文件:Sharp.gy1010.circuit.gif]]
 
[[文件:Sharp.gy1010.circuit.gif]]
 +
 +
<br><br>
 +
 +
== Quick Start ==
 +
 +
[[文件:Quantum-sharp-1024.jpg | 800px]]
 +
 +
 +
 +
=== Build ===
 +
 +
<source lang=bash>
 +
$ sudo apt-get install git wget make libncurses-dev flex bison gperf python python-serial
 +
$ wget https://dl.espressif.com/dl/xtensa-esp32-elf-linux32-1.22.0-59.tar.gz
 +
$ mkdir -p toolchain
 +
$ tar zxf xtensa-esp32-elf-linux32-1.22.0-59.tar.gz -C toolchain
 +
$ export PATH=$PATH:`pwd`/toolchain/xtensa-esp32-elf/bin
 +
$
 +
$ git clone --recursive git://github.com/icamgo/esp-idf.git
 +
$ export IDF_PATH=`pwd`/esp-idf
 +
$ cd esp-idf/examples/11_sharp_dust
 +
$ make menuconfig
 +
$ make -j2
 +
</source>
 +
 +
<br><br>
 +
 +
=== Upload ===
 +
 +
<source lang=bash>
 +
$ make flash
 +
</source>
 +
 +
You need to press the RST buttom after uploading the firmware into flash. If you guys do not like to do this please patch the /path/to/esp-idf/components/esptool_py/esptool/esptool.py :
 +
 +
<source lang=bash>
 +
diff --git a/esptool.py b/esptool.py
 +
index 755f4cb..ff92c91 100755
 +
--- a/esptool.py
 +
+++ b/esptool.py
 +
@@ -197,6 +197,12 @@ class ESPLoader(object):
 +
              + '\xc0'
 +
        self._port.write(buf)
 +
 +
+    def reset_to_app(self):
 +
+        self._port.setDTR(False)
 +
+        self._port.setRTS(True)
 +
+        time.sleep(0.05)
 +
+        self._port.setRTS(True)
 +
+
 +
    """ Calculate checksum of a blob, as it is defined by the ROM """
 +
    @staticmethod
 +
    def checksum(data, state=ESP_CHECKSUM_MAGIC):
 +
@@ -1421,7 +1427,6 @@ def dump_mem(esp, args):
 +
        sys.stdout.flush()
 +
    print 'Done!'
 +
 +
-
 +
def write_flash(esp, args):
 +
    """Write data to flash
 +
    """
 +
@@ -1503,6 +1508,7 @@ def write_flash(esp, args):
 +
    if args.verify:
 +
        print 'Verifying just-written flash...'
 +
        verify_flash(esp, args, header_block)
 +
+    esp.reset_to_app()
 +
 +
 +
def image_info(args):
 +
</source>
 +
 +
Then Quantum can reset to run your app automatically after uploading the firmware into flash
 +
 +
 +
=== Checking Output ===
 +
 +
<source lang=bash>
 +
$ picocom -b 115200 /dev/ttyUSB0
 +
ets Jun  8 2016 00:22:57
 +
 +
rst:0x1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
 +
ets Jun  8 2016 00:22:57
 +
 +
rst:0x10 (RTCWDT_RTC_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
 +
configsip: 0, SPIWP:0x00
 +
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
 +
mode:QIO, clock div:1
 +
load:0x3ffc0008,len:0
 +
load:0x3ffc0008,len:1964
 +
load:0x40078000,len:3648
 +
ho 0 tail 12 room 4
 +
load:0x40080000,len:256
 +
entry 0x40080034
 +
I (243) heap_alloc_caps: Initializing heap allocator:
 +
I (243) heap_alloc_caps: Region 19: 3FFB1AFC len 0002E504 tag 0
 +
I (244) heap_alloc_caps: Region 25: 3FFE8000 len 00018000 tag 1
 +
I (254) cpu_start: Pro cpu up.
 +
I (260) cpu_start: Single core mode
 +
I (266) cpu_start: Pro cpu start user code
 +
rtc v118 Oct 19 2016 15:22:11
 +
XTAL 40M
 +
I (302) cpu_start: Starting scheduler on PRO CPU.
 +
Welcome to Noduino Quantum
 +
Sharp GP2Y1010AU0F Particle Sensor Example...
 +
Sharp GP2Y1010AU0F Particle Sensor Example...
 +
Partical voltage = 0.49V
 +
Partical voltage = 0.49V
 +
Partical voltage = 0.64V
 +
Partical voltage = 0.57V
 +
Partical voltage = 0.58V
 +
Partical voltage = 0.51V
 +
Partical voltage = 0.57V
 +
Partical voltage = 0.60V
 +
Partical voltage = 0.56V
 +
Partical voltage = 0.58V
 +
Partical voltage = 0.54V
 +
Partical voltage = 0.47V
 +
Partical voltage = 0.67V
 +
Partical voltage = 0.57V
 +
......
 +
......
 +
</source>
 +
 +
<br><br>
 +
 +
== Code Example ==
 +
 +
<source lang=c>
 +
#include <stdio.h>
 +
#include <stdlib.h>
 +
#include "freertos/FreeRTOS.h"
 +
#include "freertos/task.h"
 +
#include "soc/rtc_io_reg.h"
 +
#include "esp_system.h"
 +
#include "nvs_flash.h"
 +
#include "driver/gpio.h"
 +
 +
enum adc1_pad {
 +
ADC1_GPIO36 = 0,
 +
ADC1_GPIO37,
 +
ADC1_GPIO38,
 +
ADC1_GPIO39,
 +
ADC1_GPIO32,
 +
ADC1_GPIO33,
 +
ADC1_GPIO34,
 +
ADC1_GPIO35
 +
};
 +
enum adc1_atten {
 +
ADC1_ATTEN_0DB = 0,    /* 0 ~ 1V can be measured */
 +
ADC1_ATTEN_3DB,        /* 0 ~ 1.4V can be measured */
 +
ADC1_ATTEN_6DB,        /* 0 ~ 2V can be measured */
 +
ADC1_ATTEN_12DB        /* 0 ~ 4V can be measured */
 +
};
 +
uint32_t adc1_read(enum adc1_pad pad, enum adc1_atten att);
 +
 +
/*
 +
* Read the amp adc, IO36 as the ADC_PRE_AMP
 +
* make sure connecting a 270pF cap from
 +
* esp32_pin5 to esp32_pin6
 +
*/
 +
uint32_t adc1_amp_read();
 +
 +
inline void delay_ms(int ms)
 +
{
 +
vTaskDelay(ms / portTICK_PERIOD_MS);
 +
}
 +
 +
inline void delay_us(int us)
 +
{
 +
ets_delay_us(us);
 +
}
 +
 +
void sharp_init()
 +
{
 +
 +
    /*
 +
    * Configure the IOMUX register for GPIO 22 (some pads are
 +
    * muxed to GPIO on reset already, but some default to other
 +
    * functions and need to be switched to GPIO. Consult the
 +
    * Technical Reference for a list of pads and their default
 +
    * functions.)
 +
    */
 +
gpio_pad_select_gpio(22);
 +
 +
/* Set the GPIO as a push/pull output */
 +
gpio_set_direction(22, GPIO_MODE_OUTPUT);
 +
 +
/* power off the led of partical sensor */
 +
gpio_set_level(22, 1);
 +
}
 +
 +
int get_sharp()
 +
{
 +
uint32_t dust_vo = 0;
 +
 +
gpio_set_level(22, 0); // power on the LED
 +
delay_us(280);
 +
 +
// read the dust value via ADC1 GPIO35 pin
 +
dust_vo = adc1_read(ADC1_GPIO35, ADC1_ATTEN_6DB) / 4096.0 * 2.0;
 +
delay_us(40);
 +
 +
gpio_set_level(22, 1); // turn the LED off
 +
delay_us(9680);
 +
 
 +
return dust_vo;
 +
}
 +
 +
void read_partical_task(void *pvParameters)
 +
{
 +
while (1) {
 +
printf("Partical value = %2.2f\n", get_sharp());
 +
vTaskDelay(8000 / portTICK_PERIOD_MS);
 +
}
 +
}
 +
 +
void app_main()
 +
{
 +
nvs_flash_init();
 +
sharp_init();
 +
 +
printf("Welcome to Noduino Quantum\r\n");
 +
printf("Sharp GP2Y1010AU0F Particle Sensor Example... \r\n");
 +
xTaskCreatePinnedToCore(&read_partical_task, "read_partical_task", 1024, NULL, 5,
 +
NULL, 0);
 +
}
 +
</source>
  
 
<br><br>
 
<br><br>
第32行： 第259行：
 
;;For more information please refer to:
 
;;For more information please refer to:
  
 +
* http://www.howmuchsnow.com/arduino/airquality/
 
* [[Noduino]]
 
* [[Noduino]]
 
* [[Noduino Quantum]]
 
* [[Noduino Quantum]]

2016年12月4日 (日) 00:32的最后版本

目录

[编辑] 1 Overview

Sharp GP2Y1010AU0F partical sensor

GP2Y1010AU0F Datasheet



[编辑] 2 Connections

Sharp.gy1010.pin.jpg 

Sharp pin 1 (V-LED)   => 150ohm resister => Quantum_VIN_3V3
Sharp pin 2 (LED-GND) => Quantum_GND
Sharp pin 3 (LED)     => Quantum_D8_IO22
Sharp pin 4 (S-GND)   => Quantum_GND
Sharp pin 5 (Vo)      => Quantum_IO35
Sharp pin 6 (Vcc)     => Quantum_VIN_3V3



[编辑] 3 Schemmatics

Sharp.gy1010.circuit.gif



[编辑] 4 Quick Start

Quantum-sharp-1024.jpg


[编辑] 4.1 Build 

$ sudo apt-get install git wget make libncurses-dev flex bison gperf python python-serial
$ wget https://dl.espressif.com/dl/xtensa-esp32-elf-linux32-1.22.0-59.tar.gz
$ mkdir -p toolchain
$ tar zxf xtensa-esp32-elf-linux32-1.22.0-59.tar.gz -C toolchain
$ export PATH=$PATH:`pwd`/toolchain/xtensa-esp32-elf/bin
$
$ git clone --recursive git://github.com/icamgo/esp-idf.git
$ export IDF_PATH=`pwd`/esp-idf
$ cd esp-idf/examples/11_sharp_dust
$ make menuconfig
$ make -j2



[编辑] 4.2 Upload 

$ make flash

You need to press the RST buttom after uploading the firmware into flash. If you guys do not like to do this please patch the /path/to/esp-idf/components/esptool_py/esptool/esptool.py : 

diff --git a/esptool.py b/esptool.py
index 755f4cb..ff92c91 100755
--- a/esptool.py
+++ b/esptool.py
@@ -197,6 +197,12 @@ class ESPLoader(object):
               + '\xc0'
         self._port.write(buf)
 
+    def reset_to_app(self):
+        self._port.setDTR(False)
+        self._port.setRTS(True)
+        time.sleep(0.05)
+        self._port.setRTS(True)
+
     """ Calculate checksum of a blob, as it is defined by the ROM """
     @staticmethod
     def checksum(data, state=ESP_CHECKSUM_MAGIC):
@@ -1421,7 +1427,6 @@ def dump_mem(esp, args):
         sys.stdout.flush()
     print 'Done!'
 
-
 def write_flash(esp, args):
     """Write data to flash
     """
@@ -1503,6 +1508,7 @@ def write_flash(esp, args):
     if args.verify:
         print 'Verifying just-written flash...'
         verify_flash(esp, args, header_block)
+    esp.reset_to_app()
 
 
 def image_info(args):

Then Quantum can reset to run your app automatically after uploading the firmware into flash


[编辑] 4.3 Checking Output 

$ picocom -b 115200 /dev/ttyUSB0
ets Jun  8 2016 00:22:57

rst:0x1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
ets Jun  8 2016 00:22:57

rst:0x10 (RTCWDT_RTC_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0x00
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:QIO, clock div:1
load:0x3ffc0008,len:0
load:0x3ffc0008,len:1964
load:0x40078000,len:3648
ho 0 tail 12 room 4
load:0x40080000,len:256
entry 0x40080034
I (243) heap_alloc_caps: Initializing heap allocator:
I (243) heap_alloc_caps: Region 19: 3FFB1AFC len 0002E504 tag 0
I (244) heap_alloc_caps: Region 25: 3FFE8000 len 00018000 tag 1
I (254) cpu_start: Pro cpu up.
I (260) cpu_start: Single core mode
I (266) cpu_start: Pro cpu start user code
rtc v118 Oct 19 2016 15:22:11
XTAL 40M
I (302) cpu_start: Starting scheduler on PRO CPU.
Welcome to Noduino Quantum
Sharp GP2Y1010AU0F Particle Sensor Example... 
Sharp GP2Y1010AU0F Particle Sensor Example... 
Partical voltage = 0.49V
Partical voltage = 0.49V
Partical voltage = 0.64V
Partical voltage = 0.57V
Partical voltage = 0.58V
Partical voltage = 0.51V
Partical voltage = 0.57V
Partical voltage = 0.60V
Partical voltage = 0.56V
Partical voltage = 0.58V
Partical voltage = 0.54V
Partical voltage = 0.47V
Partical voltage = 0.67V
Partical voltage = 0.57V
......
......



[编辑] 5 Code Example 

#include <stdio.h>
#include <stdlib.h>
#include "freertos/FreeRTOS.h"
#include "freertos/task.h"
#include "soc/rtc_io_reg.h"
#include "esp_system.h"
#include "nvs_flash.h"
#include "driver/gpio.h"

enum adc1_pad { 
	ADC1_GPIO36 = 0,
	ADC1_GPIO37,
	ADC1_GPIO38,
	ADC1_GPIO39, 
	ADC1_GPIO32,
	ADC1_GPIO33,
	ADC1_GPIO34,
	ADC1_GPIO35 
};
enum adc1_atten {
	ADC1_ATTEN_0DB = 0,     /* 0 ~ 1V can be measured */
	ADC1_ATTEN_3DB,         /* 0 ~ 1.4V can be measured */
	ADC1_ATTEN_6DB,         /* 0 ~ 2V can be measured */
	ADC1_ATTEN_12DB         /* 0 ~ 4V can be measured */
};
uint32_t adc1_read(enum adc1_pad pad, enum adc1_atten att);

/* 
 * Read the amp adc, IO36 as the ADC_PRE_AMP
 * make sure connecting a 270pF cap from
 * esp32_pin5 to esp32_pin6
 */
uint32_t adc1_amp_read();

inline void delay_ms(int ms)
{
	vTaskDelay(ms / portTICK_PERIOD_MS);
}

inline void delay_us(int us)
{
	ets_delay_us(us);
}

void sharp_init()
{

    /*
     * Configure the IOMUX register for GPIO 22 (some pads are
     * muxed to GPIO on reset already, but some default to other
     * functions and need to be switched to GPIO. Consult the
     * Technical Reference for a list of pads and their default
     * functions.)
    */
	gpio_pad_select_gpio(22);

	/* Set the GPIO as a push/pull output */
	gpio_set_direction(22, GPIO_MODE_OUTPUT);

	/* power off the led of partical sensor */
	gpio_set_level(22, 1);
}

int get_sharp()
{
	uint32_t dust_vo = 0;

	gpio_set_level(22, 0); // power on the LED
	delay_us(280);

	// read the dust value via ADC1 GPIO35 pin
	dust_vo = adc1_read(ADC1_GPIO35, ADC1_ATTEN_6DB) / 4096.0 * 2.0;
	delay_us(40);

	gpio_set_level(22, 1); // turn the LED off
	delay_us(9680);
	   
	return dust_vo;
}

void read_partical_task(void *pvParameters)
{
	while (1) {
		printf("Partical value = %2.2f\n", get_sharp());
		vTaskDelay(8000 / portTICK_PERIOD_MS);
	}
}

void app_main()
{
	nvs_flash_init();
	sharp_init();

	printf("Welcome to Noduino Quantum\r\n");
	printf("Sharp GP2Y1010AU0F Particle Sensor Example... \r\n");
	xTaskCreatePinnedToCore(&read_partical_task, "read_partical_task", 1024, NULL, 5,
				NULL, 0);
}



[编辑] 6 Reference

For more information please refer to



















来自“http://wiki.jackslab.org/index.php?title=ESP32_Partical&oldid=7550”
个人工具
名字空间

变换
操作
导航
工具箱