官方系统启动日志
来自Jack's Lab
小米路由官方系统启动日志
initing... service is stopped. ==========device=wl0======== ...wl0.type=broadcom... run1 eval type disable_broadcom run2 eval disable_broadcom 'wl0' disable wl0 br-lan: port 2(wl0) entering forwarding state ==========device=wl1======== ...wl1.type=broadcom... run1 eval type disable_broadcom run2 eval disable_broadcom 'wl1' disable wl1 br-lan: port 3(wl1) entering forwarding state br-lan: port 1(eth0.1) entering forwarding state device eth0.1 left promiscuous mode device eth0 left promiscuous mode br-lan: port 1(eth0.1) entering disabled state device wl1 left promiscuous mode br-lan: port 3(wl1) entering disabled state device wl0 left promiscuous mode br-lan: port 2(wl0) entering disabled state /etc/rc.common: /etc/init.d/rule_mgr: line 6: can't create /dev/null: Read-only file system /etc/rc.common: /etc/init.d/rule_mgr: line 7: can't create /dev/null: Read-only file system mkdir: can't create directory '/tmp/daemon/': Read-only file system /usr/sbin/supervisord: /lib/lib.scripthelper.sh: line 2227: can't create /dev/kmsg: Read-only file system /usr/sbin/supervisord: /lib/lib.scripthelper.sh: line 2227: can't create /proc/21662/fd/2: nonexistent directory mkdir: can't create directory '/tmp/daemon/': Read-only file system Sent SIGTERM to all processesib.scripthelper.sh: line 2227: can't create /de Sent SIGKILL to all processes Requesting system reboot sd 0:0:0:0: [sda] Synchronizing SCSI cache Restarting system. Digital core power voltage set to 1.0V Decompressing...done Digital core power voltage set to 1.0V Decompressing...done Found a ST compatible (Marconix) serial flash with 256 64KB blocks; total size 16MB CFE version v1.0.4 BSP: 6.37.14.34 (r415984) based on BBP 1.0.37 for BCM947XX (32bit,SP,) Build Date: Wed Apr 30 18:03:21 CST 2014 (szy@shenzhiyong-ct) Copyright (C) 2000-2008 Broadcom Corporation. Init Arena Init Devs. Boot up from NOR flash... Boot partition size = 262144(0x40000) Can't find nandflash! ccrev = 42, chipst= 0 DDR Clock: 800 MHz Info: DDR frequency set from clkfreq=1000,*800* et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 6.37.14.34 (r415984) CPU type 0x0: 1000MHz Tot mem: 262144 KBytes CFE mem: 0x00F00000 - 0x0179FE38 (9043512) Data: 0x00F58390 - 0x00F588C8 (1336) BSS: 0x00F588D8 - 0x00F9DE38 (284000) Heap: 0x00F9DE38 - 0x0179DE38 (8388608) Stack: 0x0179DE38 - 0x0179FE38 (8192) Text: 0x00F00000 - 0x00F4CCC4 (314564) Boot: 0x017A0000 - 0x017E0000 Reloc: I:00000000 - D:00000000 Device eth0: hwaddr 8C-BE-BE-20-B7-48, ipaddr 192.168.1.1, mask 255.255.255.0 gateway not set, nameserver not set bootargs: boot -raw -z -addr=0x8000 -max=0xef8000 flash0.os: Loader:raw Filesys:raw Dev:flash0.os File: Options:(null) Loading: ..... 5372256 bytes read Entry at 0x00008000 Closing network. Starting program at 0x00008000 console [ttyS0] enabled, bootconsole disabled serial8250.0: ttyS1 at MMIO 0x18000400 (irq = 117) is a 16550 init reset module! brd: module loaded loop: module loaded ahci 0003:03:00.0: version 3.0 PCI: Enabling device 0003:03:00.0 (0140 -> 0142) ahci: SSS flag set, parallel bus scan disabled ahci 0003:03:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode ahci 0003:03:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs scsi0 : ahci scsi1 : ahci ata1: FORCE: PHY spd limit set to 3.0Gbps ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed irq 175 ata2: FORCE: PHY spd limit set to 3.0Gbps ata2: SATA max UDMA/133 abar m512@0x48000000 port 0x48000180 irq 175 bcmsflash: squash filesystem found at block 127 Creating 10 MTD partitions on "bcmsflash": 0x000000000000-0x000000040000 : "boot" 0x000000040000-0x000000340000 : "os" 0x000000340000-0x000000640000 : "os1" 0x000000640000-0x000000ed0000 : "squashfs" 0x000000ed0000-0x000000ee0000 : "crash" 0x000000ee0000-0x000000fe0000 : "overlay" 0x000000fe0000-0x000000ff0000 : "board_data" 0x000000ff0000-0x000001000000 : "nvram" 0x000000000000-0x000000fe0000 : "firmware" 0x0000007fe4b4-0x000000d8b000 : "os2" PPP generic driver version 2.4.2 NET: Registered protocol family 24 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd 0000:00:0b.1: EHCI Host Controller ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:0b.1: irq 111, io mem 0x18021000 ehci_hcd 0000:00:0b.1: USB 0.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd 0000:00:0b.0: OHCI Host Controller ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:0b.0: irq 111, io mem 0x18022000 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected usbcore: registered new interface driver usbserial usbserial: USB Serial Driver core USB Serial support registered for pl2303 usbcore: registered new interface driver pl2303 pl2303: Prolific PL2303 USB to serial adaptor driver Bluetooth: Virtual HCI driver ver 1.3 Bluetooth: HCI UART driver ver 2.2 Bluetooth: HCI H4 protocol initialized Bluetooth: HCI BCSP protocol initialized Bluetooth: HCILL protocol initialized Bluetooth: HCIATH3K protocol initialized Bluetooth: Broadcom Blutonium firmware driver ver 1.2 usbcore: registered new interface driver bcm203x Bluetooth: Digianswer Bluetooth USB driver ver 0.10 usbcore: registered new interface driver bpa10x Bluetooth: BlueFRITZ! USB driver ver 1.2 usbcore: registered new interface driver bfusb Bluetooth: Generic Bluetooth USB driver ver 0.6 usbcore: registered new interface driver btusb Bluetooth: Atheros AR30xx firmware driver ver 1.0 usbcore: registered new interface driver ath3k Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (3973 buckets, 15892 max) ctnetlink v0.93: registering with nfnetlink. TCP cubic registered NET: Registered protocol family 10 NET: Registered protocol family 17 Bluetooth: L2CAP ver 2.15 Bluetooth: L2CAP socket layer initialized Bluetooth: SCO (Voice Link) ver 0.6 Bluetooth: SCO socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM ver 1.11 Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast L2TP core driver, V2.0 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com> All bugs added by David S. Miller <davem@redhat.com> ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 320) ata1.00: ATA-8: WDC WD1600BEKT-00PVMT0, 01.01A01, max UDMA/133 ata1.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 31/32), AA ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA WDC WD1600BEKT-0 01.0 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sda3 sda4 sd 0:0:0:0: [sda] Attached SCSI disk ata2: SATA link down (SStatus 0 SControl 320) Freeing init memory: 1180K Loading essential drivers... Check for USB rescure... Press Ctrl+C to enter RAMFS... Bringup the system... EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) mount: mounting none on /proc failed: Device or resource busy mount: mounting sysfs on /sys failed: Device or resource busy - preinit - - regular preinit - EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null) EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null) - init - init started: BusyBox v1.19.4 (2014-05-22 22:39:33 CST) Please press Enter to activate this console. rcS S boot: INFO: rc script run time limit to 65 seconds. init.d/fstab[693]: Cannot find device "br-lan" Thu Jan 1 00:00:06 UTC 1970 pre-system-up[891]: * Thu Jan 1 00:00:06 UTC 1970 pre-system-up[891]: ******* armv7l ******* Thu Jan 1 00:00:06 UTC 1970 pre-system-up[891]: INFO: device already initialed, web initial redirect disabled. Thu Jan 1 00:00:06 UTC 1970 pre-system-up[891]: ******* NORMAL BOOT ******* Thu May 22 16:53:00 UTC 2014 init.d/boot[982]: INFO: nvram get vlan1ports: 0 2 5* Thu May 22 16:53:00 UTC 2014 init.d/boot[982]: INFO: nvram get vlan2ports: 4 5 NTFS driver 2.1.29 [Flags: R/W MODULE]. fuse init (API version 7.15) PPP MPPE Compression module registered GRE over IPv4 demultiplexor driver PPTP driver version 0.8.5 tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> ctf: module license 'Proprietary' taints kernel. Disabling lock debugging due to kernel taint et_module_init: passivemode set to 0x0 et_module_init: txworkq set to 0x0 et_module_init: et_txq_thresh set to 0x400 eth0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 6.37.14.34 (r415984) Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usbmon: debugfs is not available Mirror/redirect action on u32 classifier Actions configured NF_TPROXY: Transparent proxy support initialized, version 4.1.0 NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd. ip_set: protocol 6 xt_time: kernel timezone is -0000 ip_tables: (C) 2000-2006 Netfilter Core Team GRE over IPv4 tunneling driver ip6_tables: (C) 2000-2006 Netfilter Core Team IPv6 over IPv4 tunneling driver PPPoL2TP kernel driver, V2.0 wl_module_init: passivemode set to 0x0 wl_module_init: txworkq set to 0x0 Neither SPROM nor OTP has valid image srom rev:0 wl0: Broadcom BCM4360 802.11 Wireless Controller 6.37.14.34 (r415984 WLTEST) PCI: Enabling device 0002:02:00.0 (0140 -> 0142) Neither SPROM nor OTP has valid image srom rev:0 wl1: Broadcom BCMa8db 802.11 Wireless Controller 6.37.14.34 (r415984 WLTEST) Adding 262140k swap on /userdisk/.swapfiles. Priority:-1 extents:2 across:270332k Fri May 23 00:53:02 CST 2014 netconfig[1339]: INFO: loading exist /etc/config/network. Fri May 23 00:53:02 CST 2014 netconfig[1339]: config switch 'eth0' Fri May 23 00:53:02 CST 2014 netconfig[1339]: option enable '1' Fri May 23 00:53:02 CST 2014 netconfig[1339]: config switch_vlan 'eth0_1' Fri May 23 00:53:02 CST 2014 netconfig[1339]: option device 'eth0' Fri May 23 00:53:02 CST 2014 netconfig[1339]: option vlan '1' Fri May 23 00:53:02 CST 2014 netconfig[1339]: option ports '0 2 5*' Fri May 23 00:53:02 CST 2014 netconfig[1339]: config switch_vlan 'eth0_2' Fri May 23 00:53:02 CST 2014 netconfig[1339]: option device 'eth0' Fri May 23 00:53:02 CST 2014 netconfig[1339]: option vlan '2' Fri May 23 00:53:02 CST 2014 netconfig[1339]: option ports '4 5' Fri May 23 00:53:02 CST 2014 netconfig[1339]: config interface 'loopback' Fri May 23 00:53:02 CST 2014 netconfig[1339]: option ifname 'lo' Fri May 23 00:53:02 CST 2014 netconfig[1339]: option proto 'static' Fri May 23 00:53:02 CST 2014 netconfig[1339]: option ipaddr '127.0.0.1' Fri May 23 00:53:02 CST 2014 netconfig[1339]: option netmask '255.0.0.0' Fri May 23 00:53:02 CST 2014 netconfig[1339]: config interface 'lan' Fri May 23 00:53:02 CST 2014 netconfig[1339]: option type 'bridge' Fri May 23 00:53:02 CST 2014 netconfig[1339]: option ifname 'eth0.1' Fri May 23 00:53:02 CST 2014 netconfig[1339]: option proto 'static' Fri May 23 00:53:02 CST 2014 netconfig[1339]: option ipaddr '192.168.31.1' Fri May 23 00:53:02 CST 2014 netconfig[1339]: option netmask '255.255.255.0' Fri May 23 00:53:02 CST 2014 netconfig[1339]: config interface 'wan' Fri May 23 00:53:02 CST 2014 netconfig[1339]: option proto 'dhcp' Fri May 23 00:53:02 CST 2014 netconfig[1339]: option mtu '1480' Fri May 23 00:53:02 CST 2014 netconfig[1339]: option ifname 'eth0.2' device eth0.1 entered promiscuous mode device eth0 entered promiscuous mode br-lan: port 1(eth0.1) entering learning state br-lan: port 1(eth0.1) entering learning state device wl0 entered promiscuous mode br-lan: port 2(wl0) entering learning state br-lan: port 2(wl0) entering learning state device wl1 entered promiscuous mode br-lan: port 3(wl1) entering learning state br-lan: port 3(wl1) entering learning state br-lan: port 1(eth0.1) entering forwarding state br-lan: port 2(wl0) entering forwarding state br-lan: port 3(wl1) entering forwarding state rcS S boot: INFO: rcS S boot timing 31 seconds. Fri May 23 00:53:30 CST 2014 INFO: rcS S boot timing 31 seconds. rcS S boot: system type(R1D/1): SATA/0 Fri May 23 00:53:30 CST 2014 system type(R1D/1): SATA/0 rcS S boot: ROOTFS: /dev/sda1 on / type ext4 (ro,relatime,barrier=1,data=ordered) Fri May 23 00:53:30 CST 2014 ROOTFS: /dev/sda1 on / type ext4 (ro,relatime,barrier=1,data=ordered) Fri May 23 00:53:30 CST 2014 boot_check[12286]: INFO: Wireless OK