ESP32 Smartconfig

2 Quick Start

In Linux:

2.1 Install ESP-IDF

$ sudo apt-get install git wget make libncurses-dev flex bison gperf python python-serial
$ wget https://dl.espressif.com/dl/xtensa-esp32-elf-linux32-1.22.0-59.tar.gz
$ mkdir -p toolchain
$ tar zxf xtensa-esp32-elf-linux32-1.22.0-59.tar.gz -C toolchain
$ export PATH=$PATH:`pwd`/toolchain/xtensa-esp32-elf/bin
$
$ git clone --recursive git://github.com/icamgo/esp-idf.git
$ export IDF_PATH=`pwd`/esp-idf

2.2 Compile & Upload

$ cd esp-idf/examples/07_smartconfig
$ make menuconfig
$ make flash

2.3 Test Smartconfig

Make sure that your phone is connected to your WiFi router.

Scan the QR code in WeChat

Coming to below page:

Click "Connecting Network" button:

Enter WiFi password then click "Connect" to complete WiFi connection. (NOTE, this network connection model only apply to 2.4G router)

The uart will output:

$ 

<br><br>

== Reference ==

;;For more information please refer to:

* [[Noduino]]
* [[Noduino Quantum]]

<br><br>
<br><br>
<br><br>
<br><br>
<br><br>
<br><br>