2014年11月9日 (日) 01:28的版本

1 总览

Arduino I/O 之数字输入输出

Arduino I/O 之模拟输出

Arduino memory

深入 PWM

撰写自己的 Arduino 库

阻抗和阻抗匹配

2 扩展

Arduino Ethernet 的另一性价比选择

DHT21/AM2301 数字温湿度传感器

3 应用

Arduino 监控客厅温度湿度

4 精华

Arduino bootloader 的烧写

面包板上的至简 Arduino

动手焊一个自己的 Arduino

5 糖豆

5.1 float2str

String(NUMBER, SCALE);
String(3.141592,5);        # "3.14159"

5.2 Software Serial

5.3 AT CMD

SerialEvent() is called after a loop(), if there is serial data in the buffer.

String input_str = "";               // a string to hold incoming data
boolean str_over = false;           // whether the string is complete

void setup() {
  Serial.begin(9600);
  input_str.reserve(200);           // reserve 200 bytes for the inputString:
}

void loop() {
  if (str_over) {
    /* Identify the CMD and processing */;

    input_str = "";                 // clear the string buffer
    str_over = false;
  }
}

/*
 * SerialEvent occurs whenever a new data comes in the hardware serial RX.
 * This routine is run between each time loop() runs, so using delay inside
 * loop can delay response.  Multiple bytes of data may be available.
*/
void serialEvent() {
  while (Serial.available()) {
    char in = (char)Serial.read(); 
    input_str += in;

    if (in == '\n') {                // read a line into string buffer
      str_over = true;
    } 
  }
}