Noduino Quantum
来自Jack's Lab
目录 |
1 Overview
- CP2102 USB to UART Chip
- ESP32 Bluetooth and WiFi SoC
- 40MHz Crystal
- Baud rate 115200
- 16MB SPI Flash (25Q128xxx)
- 5V - 12V Power Supply
2 Pin Map
3 Quick Start
The default baud rate is 115200
3.1 USB2UART
Quantum use the CP2102 USB to UART chip, you need to install the driver firstly. Accessing following url to get your driver:
3.2 Linux
Please refer to: https://github.com/icamgo/esp-idf/blob/master/docs/linux-setup.rst
3.3 MAC OS
Please refer to: https://github.com/icamgo/esp-idf/blob/master/docs/macos-setup.rst
3.4 Windows
Please refer to: https://github.com/icamgo/esp-idf/blob/master/docs/windows-setup.rst
4 Turtorial
- ESP32 Smartconfig WeChat Airkiss by default
- ESP32 JTAG
5 Peripherals
- ESP32 BMP180
- ESP32 SSD1306 OLED Screen
- ESP32 Partical Sharp GP2Y1010AU0F Particle Sensor support
- ESP32 DHT21 DHT21(AM2301) Digital Temperature & Humidity Sensor
- ESP32 PT1000 Using a 18-bit ADC MCP3421
- ESP32 PCF8563 PCF8563 I2C RTC Chip
- ESP32 BH1750 BH1750 Digital Light Sensor
- ESP32 BMP085 BMP085 Barometric Pressure/Temperature/Altitude Sensor
6 ESP32 Arch
ESP32 block diagram:
- Xtensa Instruction Set Architecture: http://0x04.net/~mwk/doc/xtensa.pdf
- Xtensa LX6 Core: http://ip.cadence.com/uploads/533/Cadence_Tensillica_Xtensa_LX6_ds-pdf
7 Hardware
8 Reference
- For more information please refer to